Yes the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks # PVD20B would fit under the rear door of your 2016 Ram ProMaster 3500 to allow you to open it. view full answer...
What you can do for a bike rack and cargo carrier option that swings away is use the Yakima EXO System with 2 Bike Rack and Enclosed Cargo Carrier - 2" Hitches # Y34ZR (with cargo box) or # Y54ZR (with cargo basket). view full answer...
The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1319 weighs 101 lbs. This is confirmed to fit your 2020 Ram 1500 with a 5-1/2' bed. view full answer...
I had our warehouse measure the Demco Hijacker Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes # DM6171 you were looking at and it is 10-1/4" long x 1-1/2" tall as shown in the included diagram.
The # DM6171 is needed when using the Demco Hijacker Autoslide 5th wheel hitch with a Trailair Rota-Flex Pin Box but can be used with the Trailair Air Ride Pin Box if desired.
I included a video of the # DM6171 for you to take a look at. view full answer...
According to the research I did, your max trailer weight you can tow with your 2012 Ram 1500 is 8,150 lbs and the max weight you can tow in the bed of your truck is 1,146 lbs. I would strongly recommend you do your own research though by either contacting a Ram dealer or look further in your owner's manual.
Based on the dry weights of the trailer you are interested in this trailer would be too heavy. You would either need to find a lighter trailer or upgrade your truck. view full answer...
On the Curt # C18152 24X60 Cargo Carrier, the hitch pin hole is 11-1/4 inches away from the closest portion of the carrier platform.
I've linked to a product demonstration video featuring this carrier. view full answer...
I confirmed with Agri-Cover (the makers of the rack) that the Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A86FR is 25 inches tall from the bottom of the bolt-on mounts to the very top of the crossbars. Note that this does not include the added height of the extremely thin lip underneath the legs. I went ahead and included a diagram of the height for your convenience. view full answer...
I spoke to EcoHitch about the EcoHitch Hidden Front Mount Trailer Hitch Receiver part # 306-X7900 and they confirmed that the line pull rating is 7,500 lbs. If you need a higher rating, I recommend the Curt Front Mount Trailer Hitch Receiver part # C31015 (4WD Models Only) which has the highest line pull rating at 9,000 lbs. view full answer...
Please note the attached image(S) showing requested measurements of the Stainless Steel Inlet for SmartPlug RV Power Cord, # SM39FR. The overall depth from back of inlet to closed face of of the stainless steel cover is 3.33". The stainless steel cover, from back of piece that mounts against trailer to the same closed face is 0.83". With the orange portion that sets inside mounting location being 2.18". The overall height of the stainless steel face plate is 4.15" and the width being... view full answer...
The BedSlide Classic Sliding Truck Bed Tray # BE53ER has a 4.5" height from the bed to the loading deck and total height from the bed to the top of the guard rails of 10.5". view full answer...
The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item # GY98GR is built to replace a 5th wheel trailer's existing pin box so the dimensions and clearance should be similar to what you already have. If you have a short bed truck you are still going to encounter issues when turning or backing depending on the size of your 5th wheel trailer's nose.
This 5th Wheel to Gooseneck pin box is only compatible with the Rhino pin box. It has a 21,000 lbs capacity and a 3,500 lbs tongue weight.
You... view full answer...
To replace the brake shoes on your Dexter 12k axle you will want the Right Hand Shoe and Lining for Dexter 12-1/4" x 5" Electric Brake Assembly item # BP04-375 and the Left Hand item # BP04-365.
These shoes are the replacements for the Right Hand Dexter Electric Trailer Brake Assembly item # 23-443 and the Left Hand item # 23-442. view full answer...
The Curt Echo Wireless Trailer Brake Controller # C51180 you were looking at does not have a maximum towing capacity and will work with any trailer with electric trailer brakes that has up to 2 braking axles.
The Echo is a great option for towing your 7600lb Alpha Wolf Trailer with your 2017 Ram 1500 Sport with the 5.7L V8 as it will not require you to drill any holes inside of your Ram to mount a controller as it installs directly into your 7-way connector, and can be used on any vehicle... view full answer...
The Flint Hill Goods 30x50 Wheelchair Carrier # FHG77ZR weighs 80 pounds. My stepdad uses this to haul all sorts of stuff and he loves it. view full answer...
From the pictures you sent, it appears that your mounting holes just need to be cleaned. You need something like the Nylon Tube Brush - 3/8", part # 814113. Once the mounting holes have been cleaned, you should be able to use the 12mm bolts.
i have included a product description link and a video review link below. view full answer...
I have a great solution to the problem. Unfortunately, since the Yakima OverHaul HD Adjustable Truck Ladder Rack # Y01151-58 uses the inside of the truck rails to install, it will interfere with your factory tonneau cover on your 2021 RAM 1500 (5-1/2 Foot Bed without Rambox). I went ahead and called my contact at Yakima to see if the Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks # Y01155 would work with the OverHaul HD and your cover, but Yakima... view full answer...
Dexter doesn't actually make a 4k rated axle, but they do make a 4.4k axle which has a diameter of 3 inches. The next smaller axle is a 3,500 lb axle which has a 2-3/8 inch outer diameter. view full answer...
The cushioned equalizers included with the # K71-657-00 E-Z Flex Suspension Upgrade Kit are 2-7/8 inches tall, which would lower your trailer by a half inch, which will only lower your ride height by small amount. The kit includes the shackles and related hardware. view full answer...
I've attached a picture with three different measurements for the B&W Extend-A-Goose Gooseneck Coupler - 2-5/16" Ball - 10" Offset, # BWTEXA4200. It is 12 inches from the base or bottom of the coupler to the center of the lowest pin hole that connects your gooseneck trailer to this Extend-A-Goose. From the base to the bottom of the second weld, the measurement is 5-7/8 inches. From the base to the top of that same weld, the measurement is 8-5/8 inches. I've tried to color code to simplify... view full answer...
The weight capacity on the Curt TruTrack 2P Weight Distribution System # C79JR is controlled by the spring bars used and it will not increase by using a heavier duty ball mount. You will have the same tongue weight capacity of 800-1,000lbs and maximum trailer weight of 10,000lbs.
If you have a trailer that is heavier you will be able to use the Curt TruTrack Weight Distribution System # C17501. This system is rated for trailers with a tongue weight of 1,000-1,500lbs and a maximum trailer... view full answer...