Trailer Valet RVR3 Remote-Controlled Trailer Dolly Review Video

In order to take your trailer down your driveway I recommend the Trailer Valet RVR5 Remote-Controlled Trailer Dolly - Wireless Remote - 5,500 lbs #TVRVR5. However, you will need to find out the actual slope in order to verify if this will work for…

I went to the warehouse and checked out the Fan-Tastic Vent Roof Vent w/ 12V Fan, part #FV802250. The fan motor on the vent has a 3-amp draw. This fan is designed to fit roofs that are up to 4-inches thick and the rough opening size you need for this…

I went out to the warehouse and pulled the Swagman RV Mounted 4 Bike Carrier, part #S80600, and took some measurements for you. Both parts have identical dimensions. The bike carrier measures 20 inches wide (from outside to outside) and 40 inches…

The Titan Zinc-Plated, Leverlock Coupler #T4845000 measures 4-1/8 inches tall, so it looks like it may be too tall for your set up. If so, the only other 5,000 lb coupler for a 2" hitch ball that may work is one that has half of the height, the…

I have included an image below with the measurements for the mounting plate on the Xtreme Off-Road Ratcheting Trailer Jack #ARK54FR. The hole to hole measurements are from center of hole to center of hole.

I wasn't sure exactly what dimension you were looking for on the mounting bracket of the Trailer Valet part #STC-V211 so I attached a picture that has nearly every dimension for you to check out.

The Truma LevelCheck Propane Tank Sensor part #TR77VR uses ultrasound technology to check the propane level, the same technology used in doctors offices for newborns. Simply turn the device on and run it up and down the tank, the light will turn…

On solid pavement, the Trailer Valet can handle a slope up to 5 degrees, but when going up a grade, the #TVRVR3-BB225 can only be used to push a trailer, not pull it so it wouldn't be suitable for pulling a boat out of the water up a boat ramp.…

Yes, we do have a solution for you. I recommend the Trailer Valet XL trailer dolly #TVXL2 which has a 2" ball. This trailer dolly has an integrated drive system that allows you to easily move your trailer. The dual posi-traction wheels help you…

I made a quick diagram for you to check out, but the lowest bolt hole on the Trailer Valet Remote-Controlled Trailer Dolly #TVRVR3 will be at 13-1/2".This means that this will be where the bottom most part of your trailer frame will rest when…

Since there isn't an adapter for the Lock N Roll articulating couplers you wouldn't be able to use the part #TVRVR9 but you could use the Trailer Valet RVR3 part #TVRVR3 instead which instead attaches to the frame of the trailer. This…

I checked with Trailer Valet and the height range of the frame bracket of the Trailer Valet RVR3 part #TVRVR3 is between 13.5 inches and 20 inches.