What Is The Lowest Workable Tongue Height When Attached To The Trailer Valet TVRVR3 Dolly?

Question

Question:

What is the lowest workable tongue height that the bracket can be mounted? What is the height from the ground to the shoe? I move an enclosed trailer into a garage and the tongue must remain low for the top of the trailer to clear the top of the door.

asked by: Herman P

0

Expert Reply:

I made a quick diagram for you to check out, but the lowest bolt hole on the Trailer Valet Remote-Controlled Trailer Dolly # TVRVR3 will be at 13-1/2".This means that this will be where the bottom most part of your trailer frame will rest when using the frame brackets to attach to your trailer.

expert reply by: Lazer S

0

Trailer Valet TVRVR3 Lowest + Highes Bolt Holes
(click to enlarge)

Answer 1

Yes both of the Trailer Valet Remote-Controlled Trailer Dollies #TVRVR5 and #TVRVR3 have internal brakes that are automatic. What this means is that unless you are intentionally moving them they will not move or roll. The 5 is just as ball mount…

view full answer...

Answer 2

I took a look at the manual for the Trailer Valet RVR3 Remote-Controlled Trailer Dolly part #TVRVR3 and the following is what they recommend for storage. "Put the RVR in the transport box/bag delivered from the factory. If the storage box/bag…

view full answer...

Answer 3

If your trailer is 5,000 when you are wanting to move it then you can use the Trailer Valet RVR5 Remote-Controlled Trailer Dolly #TVRVR5 which is rated for 5,500 lbs. If you are wanting to move your trailer and that weight exceeds the 5,500 lb mark…

view full answer...

Answer 4

Since there isn't an adapter for the Lock N Roll articulating couplers you wouldn't be able to use the part #TVRVR9 but you could use the Trailer Valet RVR3 part #TVRVR3 instead which instead attaches to the frame of the trailer. This…

view full answer...

Answer 5

In order to take your trailer down your driveway I recommend the Trailer Valet RVR5 Remote-Controlled Trailer Dolly - Wireless Remote - 5,500 lbs #TVRVR5. However, you will need to find out the actual slope in order to verify if this will work for…

view full answer...

Answer 6

The top of your trailer tongue will be bellow 18". The bracket sits on top of the already 9" tall Trailer Valet RVR3 item #TVRVR3. The bracket is 9" tall with multiple adjustment points built in so you can mount it wherever you need to…

view full answer...

Answer 7

When using the Trailer Valet with a tandem axle trailer it is recommended to use the Trailer Valet Trailer Wheel Dollies #TV56FR under the rear wheels. The dollies will provide you with much better turning radius, as the tires will try and bind up…

view full answer...

Answer 8

The maximum grade for the Trailer Valet Remote-Controlled Trailer Dollies is 5 degrees. The capacity does not change this figure although the higher rated RVR9 part #TVRVR9 will preform better than the RVR3 part #TVRVR3-BB225 with a lighter trailer…

view full answer...

Answer 9

The Trailer Valet RVR5 Remote-Controlled Trailer Dolly - Wireless Remote #TVRVR5 will have a 5,500 pound weight capacity, with a 550 tongue weight capacity, so it will definitely handle your boat and trailer. However, the #TVRVR5 can only operate…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What Is The Lowest Workable Tongue Height When Attached To The Trailer Valet TVRVR3 Dolly?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching