Saris Bike Racks Hitch Tite Anti-Rattle Hitch Pin Review Video

The ball of the Curt RockerBall 2-5/16" Shock Absorbing Hitch Ball and Ball Mount w/ Sway Control Tab #C45WR is not installed or torqued down when it arrives. You'll need to torque the nut to 250 ft lbs.

Yes, you can install the ball of the Curt RockerBall 2-5/16" Shock Absorbing Hitch Ball and Ball Mount w/ Sway Control Tab #C45WR in the rise position if you wanted which would give you the rise of 3/4 inch that you mentioned.

What I think you are asking, when you state correct height, is height of the ball mount on your 2021 Ram 2500. To choose the best adjustable ball mount for you need to determine the tallest rise and deepest drop you'll need. This will be the…

The B&W Tow & Stow 2-Ball Mount - 2-1/2" Hitch - 7-1/2" Drop/Rise - Black #BWTS20040B may have the correct rise/drop to tow your trailer level, but that will depend on the exact height of your trailer hitch receiver and the coupler…

I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7" Drop part #BWTS20040B (part #BWTS20040C) as it varies by application so you will…

We have found that the Saris Hitch Locks do fit the Reese Q-Slot PS63138 that you mentioned so this would work well to give the rack a hitch lock and cable lock #SA984. This will allow you to lock the rack to your vehicle as well as long the bikes to…

I looked at the installation instructions for your 2014 Subaru Forester and found that the wiring harness is located behind the rear panel on the driver side. The location is very similar to the Crosstrek in the attached video. The video explains how…

The XL Anti-Rattle Trailer Hitch Receiver Lock #SHP2040-XL that you referenced is designed to fit 2-1/2 inch hitches like what your truck has so it would fit and work well for you. I attached a review video for this for you to check out as well.

We sure do have the part you are looking for. The Saris Cable lock And Anti-Rattle hitch Lock is part #SA984. This kit helps secure the carrier to the trailer hitch and also the bikes to the carrier.

You can back up a trailer with a weight distribution system installed on as long as you don't end up in too tight of a turn. This is especially true with the Curt Weight Distribution System part #C17422 as it has a friction sway control system as…

Yes, The Replacement Ratcheting Wheel Tray Strap #SA17158 is relatively easy to get in and out of the clip. Including the buckle the strap is 13-1/2 inches long and has a width of 7/8 inches.

The only trailer hitch option avavailbe for a 2020 Jeep Wrangler Unlimited EcoDiesel is class III, the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT78MR which is rated up to 4,500 lbs. This will exceed the towing capacity of the vehicle so…