Saris Bike Racks Cable Lock and Anti-Rattle Hitch Lock Review Video

I have the perfect bike rack for your Electra Townie and for this I recommend the Saris Freedom 2 Bike Platform Rack part #SA4412B. The reason I recommend this bike rack over the Malone rack is because you don't need to use an adapter bar at…

I went to the shop and spoke with the installers about the Saris Freedom 2 Bike Platform Rack, part #SA4412B. As you stated, the installer in the video just places the bike on the carrier from the side. He also said that when he is placing a bike…

The Saris Freedom 2 Bike Platform Rack #SA4412B will accept bikes with a wheelbase up to 44-1/2-inches (as measured from the two tire-to-ground contact points). The adjustable cradles on the upright mast will secure your bikes by their down tubes.…

Platform style bike racks are easier to load. The Saris Freedom #SA4412B does have a significant rise in the shank that makes the platform higher up than other platform style racks (8 inches from the top of the receiver opening to the bottom of the…

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this…

This may not be the answer you are wanting to hear but the only hitch pin we can recommend for your Saris Freedom is the one Saris has tested and recommends #SA3021 for just the pin or part #SA3022 for the lock as well. The price on these is better…

The Saris Freedom 2 Bike Platform Rack part #SA4412B only weighs 22-1/2 lbs so it will be very easy to take on and off the vehicle. In order to do this you simply need to unscrew the anti-rattle hitch bolt from the shank and trailer hitch. Then,…

The Saris Freedom 2 #SA4412B is a great choice if you're looking for a light weight rack as it only weighs about 22 lbs! As far as making it as easy as possible to install and remove, maybe having a power tool to tighten down the…

Draw Tite and Hidden Hitches are made by the same company so they are the same. All of the hitches confirmed to fit your 2015 Honda CRV will be the same distance recessed behind the rear bumper. From the center of the hitch pin hole to the edge of…

The Saris Bones Bike Rack #SA883 is compatible with the Saris 8 foot cable lock and hitch lock part #SA984 that you mentioned. This will lock the rack to the vehicle hitch as well as the bikes to the rack.

Hitch pins like what comes with the part #HRLHPC2 do not have weight capacities as they don't actually bear any of the weight of a trailer so this hitch lock would work great on your trailer that weighs between 7,000 and 8,000 lbs.

I have a one lock security solution for you. I recommend the 2 Inch Hitch Receiver Lock with 8 Foot Cable, Item #HRLHPC2. This Master Lock will secure your trailer hitch receiver and cargo carrier with locking pin and clip. You can wrap the 8 foot…