Roadmaster Hybrid Coiled-to-Straight Safety Cables Review Video

The instructions for the Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25 call for the power connection to be made at a 12V power source. So while it doesn't say you HAVE to connect to the battery bank running off of…

The general reason a battery needs to be disconnected for flat towing is because there are certain functions that need to be disabled to prevent your vehicle's battery from draining. You wouldn't want to get to your…

Sounds like the Series 32 Kwikee step gear box is damaged and in need of replacing if the motor blows fuses when connected to it. What it sounds like is the motor is trying to work to hard to move the gear box which is why it blows the fuse. For a…

In order to determine if the Roadmaster Battery Charge Line Kit for Towed Vehicles part #RM-156-25 will charge your vehicle's battery with the tow vehicle off you simply need to test the 12 volt power pin in the 1 o'clock position on…

The Roadmaster base plate kit part #RM-521559-5 that you referenced does have safety chain tabs built into it so you do not need to add anchors. I attached a picture of them pointed out that I took from the install instructions.

The 12 volts you mentioned is indeed correct for the Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25. As for the cover for the terminals, if I'm understanding correctly you are asking about covers for the ring terminals on…

The center pin of a 6-way is typically the 12 volt accessory circuit which is commonly used for charging batteries. The same 12 volt pin on a 7-way is the one in the 1:00 position. Between the two connectors styles those are the correct pins to use.

The Roadmaster battery charge line kit part #RM-156-25 would allow current/voltage to flow in either direction as it does not have a diode in it that only allows it to go one direction.

For the Blue Ox Avail tow bar #BX7420 the correct cover is the part #BX88309 which is designed specifically to fit that model.

I went out and measured the distance between where the legs of the tow bar attach on the Roadmaster Base Plate to Tow Ready Tow Bar Adapter, #RM-025, and the on center measurement is 31 inches. The distance between the mounting bolt holes that…

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

We do offer replacement attachment tabs for the etrailer base plate kit part #e86YR with the part #DM86MV.