Roadmaster Universal Brake Monitor Review Video

Yes, you do. The wiring that comes with the Blue Ox Accessory Kit item #BX88308 only controls your towed vehicle's lights. You will need to add the Roadmaster Battery Charge Line Kit item #RM-156-25.

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

Thank you for reaching out, it sounds like you have everything in place on your Equinox and just need the motorhome side. The Roadmaster 2nd Motorhome Monitor/Alarm Kit #RM-98850 would take care of that if you are wanting it to operate the same as…

For the Roadmaster InivisiBrake monitor part #RM-9530 you'd wire it to your Invisibrake by running the black wire to ground, the red wire to 12 volt power, the yellow to the breakaway switch, and the blue wire to the brake light switch. I also…

The Roadmaster Stop Light Switch Kit #RM-751490 will get power from a fuse and connect to one of the black wires on the switch. The other black wire can connect to your monitoring system as the power as the switch will only allow power to pass…

The Roadmaster Universal Brake Monitor #RM-9530 is just the monitor. It is designed to be used in conjunction with a braking system like the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The arm that you are seeing would be included…

I spoke with my contact at Roadmaster and he informed me that the Roadmaster Universal Brake Monitor #RM-9530 that you referenced will work without a breakaway kit installed. Reason being is that under normal circumstances the breakaway circuit of…

I attached a diagram that shows how the monitor wire gets installed with the Roadmaster Inivibrake part #RM-8700. Since you don't have the same blue wire you'll need to use a circuit tester like part #PTW2993 to test all of the wires that are…

The Roadmaster InvisiBrake Supplemental Braking System #RM-8700 monitor wire comes with "bullet" style connectors. The monitor wire will not connect to the brake light switch wire on your motorhome. It simply runs up to your dash for the…

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…

To see a couple diagrams that show how the 6-way to 7-way adapter part #47435 is wired up check out the pictures I attached. The 6-way of this adapter has the center pin as the 12 volt circuit. That is the usual circuit that gets moved around on…