Roadmaster Universal Brake Monitor Installation - 2014 Chevrolet Malibu Video

For the Roadmaster InivisiBrake monitor part #RM-9530 you'd wire it to your Invisibrake by running the black wire to ground, the red wire to 12 volt power, the yellow to the breakaway switch, and the blue wire to the brake light switch. I…

I reached out to Roadmaster and the reason your Older Roadmaster Invisibrake #RM-8700 requires the #RM-8700-9530 is that it was made before the monitor 9530 was made, and the adapter has a built in microchip that regulates the voltage to the…

In order to use the Roadmaster InvisiBrake Supplemental Braking System part #RM-8700 on a 2019 Jeep Wrangler Unlimited you'll need the Roadmaster Stop Light Switch Kit part #RM-751490. This will allow you to send a signal to the monitor in…

Thank you for reaching out, it sounds like you have everything in place on your Equinox and just need the motorhome side. The Roadmaster 2nd Motorhome Monitor/Alarm Kit #RM-98850 would take care of that if you are wanting it to operate the same as if…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Since you have a 10k Blue Ox tow bar like the #BX7420 you would need a Blue Ox base plate kit with the part #BLU33FR which is confirmed as a fit for your 2023 Ford F-150. For lighting you can use the diode kit, #RM-15267, and not have to worry about…

The Roadmaster Universal Brake Monitor #RM-9530 is just the monitor. It is designed to be used in conjunction with a braking system like the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The arm that you are seeing would be included…

The only difference between the Roadmaster Direct-Connect Base Plate Kits like part #RM-523179-5 and the Roadmaster Crossbar-Style Base Plate Kits like part #RM-523179-4 are the removable arms. The Direct-Connect style means you can attach a tow bar…

I attached a diagram that shows how the monitor wire gets installed with the Roadmaster Inivibrake part #RM-8700. Since you don't have the same blue wire you'll need to use a circuit tester like part #PTW2993 to test all of the wires that are…

Red lights flashing with the Roadmaster Brake Monitor part #RM-9530 with an audible alert indicates a breakaway is in progress. The yellow wire of this kit attaches to the breakaway kit wiring installed on the tow vehicle. When voltage is applied on…

It comes down to the serial number on how to pick between the 9420 part #RM-9420 and the 9425 part #RM77FR. If the serial number is below 27,496 then you go with the 9420 or if it's above that number you go with #RM77FR.

If your power connection with the Blue Ox Patriot III BRK2019 supplemental braking system is spotty it likely isn't the plug on the system. To use this system you do need to use 12 Volt Outlet Kit #RM-9332 in order to ensure a constant 12 volt…