Pro Series Round A-Frame Jack Review and Installation Video

Hey Chris, it sounds like all you'd need to connect the MB Sturgis Propane Extension Hose for Small Appliance #100284-144-MBS to the Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks #CAM59005 is the MB Sturgis…

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

I pulled up pictures of your 2016 Jayco 174bh Baja Edition and it appears to have a standard A-frame style jack installed with a sidewind handle. The Bulldog jack part #BD155157 would be a great option as it mounts to a-frame trailers like yours and…

The distance from the bottom of the mounting flange of the Bulldog Jack part #BD155157 to the bottom of the outer tube of the jack measures 6-1/4 inches.

On the Pro Series Round, A-Frame Jack w/ External Gearbox - Sidewind - 14" Lift - 2,000 lbs, #PSRV20000103, they use a 1 to 1 gear ratio. With the That will move one inch for every 8 complete rotations, so that will be a total of 112 rotations…

Yes the Demco A-Frame Trailer Coupler #DM14793-97 could be welded instead of bolting it to the trailer. Instead though I would recommend the #DM14793-52 which isn't primed so would be a bit easier to weld.

The Demco A-Frame Trailer Coupler part #DM14793-97 is designed for a standard a-frame trailer with a 50 degree angle. This is the most common type so there really shouldn't be any other issues that affect fit. That said, I have attached some…

We have exactly what you would need. The Fulton Jack part #FXPD15L has a 1,500 lb capacity, has dual wheels, and can fit a 3 by 5 inch trailer frame.

Yes, for your 2018 Ford F-150 a Timbren like the part #TFR1504E (which is a custom fit for your truck), is exactly what you need. This will give you the rear suspension support you need to greatly reduce sag when you have your truck bed loaded or if…

I went to our warehouse and pulled one of the Pro Series Trailer Jack part #PSRV20000103. I took some measurements and have attached a photo of the jack with the measurements noted. From the end of the handle to the outer tube on the jack it measures…

I do have a possible solution for you but the most well equipped 2018 Jeep Wrangler JL Unlimited has a maximum tongue weight capacity of 350 lbs therefore, the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT78MR will not increase your tongue…

It is actually quite easy to install the Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks, part #CAM59005. You will simply unscrew the old regulator from the sidewall. Then, using a wrench, remove the supply hose. You then…