Optronics Oval LED Trailer Light Review Video

The closest to 4 inch round lights we have is the Optronics LED Trailer Utility Light #BUL43CB or Trailer tail Light #STL55RB which are actually 4-5/16" diameter x 1-15/16" thick. These are designed to fit the Rubber Grommet for 4"…

The model 1980 Bearing Buddy simply means that they fit a 1.980 inch hub bore. There is one difference of note between Bearing Buddy Bearing Protectors #BB1980A (Chrome Plated) or #BB1980A-SS (Stainless Steel) and the Bearing Buddy Bearing Protectors…

Based on what we could find, the AL-KO 8490 is a 3,500 lb axle, and your info stating the 5 on 4-1/2" bolt pattern and 10" x 2-1/4" drum size supports that as well. I do recommend verifying what you need by taking apart your current…

Based on what information I could find about AL-KO 8490 hub and drums, it is rated for 3,500 pound axles, has a 5 on 4-1/2 bolt pattern, and is a 10 by 2-1/4 inch drum. If this is the case, we have several options for you. I have attached a link to…

We do carry a range of replacement trailer brake magnets and you can use the link provided at right. The best and easiest way to find replacement bearings and seals is to obtain the part numbers from the original parts. My research on your Al-Ko hub…

The Timbren systems that include brakes do not have parking brakes. The electric drum brakes included are Axletek. The 6 inch measurement from the hub face to the hangers of the system is accurate for the #A35RD545E system you're looking at.

The Dexter Electric Trailer Brake Kit w/ Parking Brakes #23-112-113 would be a fit for the 5-bolt pattern of the Timbren Axle-Less Trailer Suspension #TASR35HDS06 . Both the Dexter Trailer Hub and Drum Assembly #8-201-9UC3-EZ and etrailer Easy Grease…

For the clearance light part #AL91RB we have the grommet part #A91GB which is basically a hard rubber.

The matching passenger side tail light for the Command #328-003-81LBM1 is part #328-003-81BM1.

The spindle diameter of the Timbren kit part #ASR35HDS02 where the seal rides is definitely 2.25 inch so to go with a disc brake setup for this setup will require a hub that has that size seal. That said, the Kodiak Disc brake kit part #K2HR526DKG…

Thank you for the photos, they were very helpful; we do have replacements for the AL-KO 8490 hubs with a 6 on 5-1/2 bolt pattern you have, though to make sure you get the correct replacement you need to take apart your hub assembly and look at the…

According to SumoSprings, 6" is the minimum for the #TSS-106-40. I asked them about this and they said you cannot use these if the space is under 6" so unfortunately they won't work for you. Doing so will overload the springs which can…