Parts Needed to Add Disc Brakes to Timbren Axle Less Kit ASR35HDS02
Question:
Hello, I am looking to find disc brake hubs that fit with the ASR35HDS02. I have looked through your QandA and the question has been asked before but the answers to which hubs work well seems to differ. For example, here: The suggested parts call for a GS-2125DL grease seal with a 2.125inch ID. However, here: The idler hub recommended 008-213-9B uses RG06-070 which has a 2.25inch ID. Lastly, here The #42 spindle is referenced and the hub recommended is 42865-KIT with a 2.125inch ID. However, the #42 spindle references a 2.25inch ID grease seal. Can you please confirm which disc hubs will work with these axles and also the bearings and grease seals appropriate.
asked by: Thomas O
Expert Reply:
The spindle diameter of the Timbren kit part # ASR35HDS02 where the seal rides is definitely 2.25 inch so to go with a disc brake setup for this setup will require a hub that has that size seal. That said, the Kodiak Disc brake kit part # K2HR526DKG that was mentioned in the first question you referenced does require correct size inner seal so it would work great.
The seals needed are # RG06-070. You would also need the bearings part # 25580 and # 15123. The bearings are sold individually so you would need to order a quantity of two for two hubs (the grease seals are sold as a pair).
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet/KodaGuard - 5,200 to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 5200 lbs
- 6000 lbs
- Brake Assembly
- 6 on 5-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Can Disc Brakes be Installed on Timbren Axle-Less Suspension for 5,200 Pound Axles
- Search Results: asr35hds02
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Q&A: How To Use 5 on 5 Wheels with the Timbren Heavy-Duty Axle-Less Trailer Suspension
- Q&A: Timbren Axle-Less System Compatible with 5 on 5 Inch Bolt Pattern
- Search Results: leveling jacks
- Search Results: 500931pr
- Shop: Brake Controller
- Article: Where to Position the Trailer Axle?
- Shop: Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet/KodaGuard - 5,200 to 6,000 lbs
- Shop: Removable Xtreme Off-Road Swing-Up Trailer Jack - Dual Wheel - Sidewind - 10" Lift - 1,650 lbs
- Shop: Square Pipe Mount Swivel Jack w Footplate - Weld On - Sidewind - 15-1/4" Travel - 3,000 lbs
- Q&A: Dimensional Drawings of the Timbren Heavy-Duty Axle-Less Trailer Suspension Part # ASR35HDS02
- Q&A: Upgrading Keystone Premiere Trailer to Independent Suspension with Disc Brakes
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: license plate bracket with light
- Search Results: license plate bracket
- Search Results: trailer couplers
- Search Results: articulating hitches
- Q&A: Hub/Drums and Brake Assemblies for Use with Timbren 3,500 lb Axle Less
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Shop: Trailer Wiring