Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that are ready to ship
7-1/2" x 3-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.
Features:
Specs:
This red LED light serves as a trailer tail light with stop, turn, and tail functions. The light gives your truck or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your truck or trailer.
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent vehicle and trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
The surface-mount technology used to construct these lights protects the LEDs from shock and vibration better than through-hole technology because the diodes are soldered directly to the surface of a printed circuit board instead of attached with wires that run through holes in the board. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability, and durability.
This GloLight has a standard 3-prong plug as pictured above. A 3-prong pigtail adapter (A45PB or A47PB - sold separately) is required to connect this light to your vehicle or trailer. The built-in polycarbonate mounting flange makes it easy to install this light on your trailer. Four screws (not included) are required.
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Brett Johnson: (silence)The Glolight is the stunning combination of premier lighting technology, meeting world-class style and capabilities. The introduction of the Glolight series represents the first truly different approach in years to the visual presentation of stop-tail-turn lamps.Most LED lamps have hotspots or patterns of bright light. Glolight lamps are visually distinctive from other LED lamps, because their lenses diffuse the light, giving them a smooth, bright, glowing appearance.The Glolight optical technology is so different, it's patentable. And Optronics has 35 new products with Glolight technology in its pipeline, right now. Mudd: Lighting is one of the most visibly predominant features on any vehicle, and this is a completely different looking yet highly effective light. We're focused on integrating the latest technology into our manufacturing process, and these new lights clearly represent the innovative partnership between Vanguard and Optronics.
Innovation is important to Vanguard, our customers, and our industry. Robert: Glolight technology looks different because it is different. Different in its optical approach and different all the way down to the circuit boards.We designed and manufactured all of our lamps using the most advanced engineering techniques, and test them in our own world-class, state-of-the-art optical testing facility. Lamps are engineered to resist everything, from shock, to dust, to high-velocity water spray. We're committed to designing and manufacturing erosion-resistant LED lighting products.
And Glolight lamps are produced using solid state, surface-mount device, or SMD, technology.Most LED lamps sold in the heavy duty market today, use what is typically referred to as "through hole" construction. Optronics LEDs are mounted directly to the surface of the circuit board, eliminating exposure to connecting points. LED lamps with SMD technology, like Optronics' new Glolight, are so robust that they can continue to function even if their circuit board is completely submerged in water. The unique Glolight lenses and housings are made of tough polycarbonate material that is sonically welded to create an impermeable seal. Glolight lamps meet all FMVSS 108 and SAE photometric requirements for visibility and safety.
And our lamps are tested at a certified, independent laboratory.I guess it's redundant to say this, but our lamps come with a lifetime warranty. Roush: There's nothing out there that's as eye-catching and effective as these Glolight lamps. Vanguard is always drawn to component supplier products that contribute to our customers' efforts to operate more effectively and safely. Glolight lamps just look different and more noticeable. And that means better safety.
Brett Johnson: With world-class manufacturing facilities, harness making capabilities, and a global market presence, Optronics is now changing the competitive landscape in HD lighting. We always have access to a lighting manufacturer with global sophistication, fleets are enjoying increased product availability, and everyone is befitting from new, innovative technology and the industry's most competitive pricing structure. With Glolight, Optronics is sending a signal that things have changed in the HD lighting industry.
Average Customer Rating: 4.8 out of 5 stars (1325 Customer Reviews)
7-1/2" x 3-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.Nice product. Very bright. Definitely cooler looking than the incandescents that were originally installed.
Absolutely LOVE these lights. Draws attention and I’m constantly asked “where did you get those” all the time. This was my second round of these. Thanks!
Looks fantastic
Perfect
etrailer does provide a wide range of products with different price points so the customer has a lot of choices to make the decision that is right for her\him. You also offer good online support documentation and your technical staff is also very helpful in helping the customer make the right choices.
Unfortunately, you left me with a very bad experience. I ordered a full set of lighting & wiring to redo our quad trailer from the 7-pin plug to reverse lights. A large order. I erroneously ordered 2 reverse\turn single lights, which is on me, so I expected a restocking fee (a little excessive, but that's the inventory business). I had to return the 2 wrong lights and order the correct one. I returned both lights, but etrailer said they only received one, which I was 99% sure I returned both. You had no interest or showed any flexibility considering maybe I was correct. This is a one year review you have asked me to submit and the light you claimed I did not return, still has not shown up in my garage. I liked dealing with you on numerous occasions, but I have taken my business elsewhere. That was a sad experience.
Amazing upgrade from the old metal lights even with led replacement bulb in the metal cans. One video is the halo tail lights installed, the other is chasing a ground issue with the old lights for comparison.
These lights are totally amazing, very bright and small footprint, just need a 3/4 drill bit and they fit like a glove, will buy more for other boat trailer upgrades.
I have had these installed for a year now on my 14ft utility trailer. I love these lights! They are strong, durable, bright, and look so super cool at night! Most recently, last month, I trailered 1500 miles and through the mountains in West Virginia. They held up through curves and bumps and rainstorms and even dime-sized hail! I would recommend these to anyone who needs this style of light! I wish I had brackets enough to put two on each side... just so it would look extra bada**!
The Igor worked great. I had a heck of a time trying to order lights for the trailer - either not getting the ones I intended getting or mismatched lights. But you came through like me a champ. Thanks.
a little loose in the side marker bracket, but easily solved with a wiretie.
Added Glolight LED's to my trailer. Much brighter than the factory originals. Makes launching pre sunrise much easier. You can see where you are backing up.
Perfect for replacing the older lights on the trailer
Excellent replacement. Looks like original ones and simple to install. Tried to replace bulbs in old one's they would not hold contact and bulbs were almost as much as the replacement I saved time and anguish by just replacing the old ones
Very durable! After a year of use they as. Right as the day I installed them. Speaking of which, there was no surprises with this either.
Was not happy with the packaging. GloLights were not packaged, just placed loose in the box with other items. One piece of brown paper in the box for a void filler. Lights were scratched up when arrived.
Excellent hi vis lighting for my traile r.
Upgrading our 1998 Coleman Grandview, the old incandescent just seemed too dim.
Nice light, only suggestion would be to list some wiring options, was a bit confusing going from the old Bargman to the new LED.
But I read through the Bargman page here and got squared away.
Pic is LED before anchoring compared to the stock on the right. BIG improvement.
Fast shipping and great product! Exact replacement off a 2017 Skeeter fx21 bass boat
got these because they came up as replacement for the number of the old light that came out, these are ok but not really bright and I would have gone with a brighter unit even if I had to cut the metal out a bit to make it fit
Great light and bright....
This one is for the “driver” side. It has the lens on the bottom for lighting the license plate. (It does not include the license plate holder. I like this one because you just push in the wires. I recommend this light.
Small led, nice light
These are great light. They look so good i put them in my restomod. I didnt like the factory light i replaced all lights with LEDs. These were a perfect fit!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lann
2/13/2019
Still just as bright as ever. Still works great with ZERO issues.