Fulton F2 Fully Enclosed Trailer Winch Review Video

Brakes can be installed on only one axle of a tandem axle trailer, however you should first check your state laws to see how many brakes are required for the gross vehicle weight rating (GVWR) of your tandem axle trailer. Some states require a…

I reached out to my contact at Dutton-Lainson and the Dutton-Lainson Covered Hand Winch - 2 Speed - Freewheel - 25' Strap - 2,600 lbs #DL17085 will mount the same as your current DL1802A #DL14627. With that said the #DL17085 will be about…

I wish we had an adapter that woudl let you use the Fulton F2 Swing-Up Trailer Jack, PART #F1413100334 with the 5 x 4 mounting plate on your trailer but we do not have any available. You will need to either have the plate you have cut off and…

If you measure the distance between the mounting holes on the bracket you have on your trailer, and they do not match the mounting holes on your F2 jack you may need to have the old bracket removed and use a mounting bracket like part #F500277 for…

The Fulton mount #F500276 hole to hole length center on center is 5-1/2 inches and the hole to hole width center on center is 4-1/2 inches. The overall is 6 by 5 inches. The bolts included are 7/8" with threads that are 16 course.

The weld-on mounting plate for the Fulton F2 Swing Up Jacks is part #F500277 and this plate's jack mounting holes are spaced at 4-1/2 inches horizontally and 3-7/8-inches vertically as shown in the linked photo. Feel free to submit a picture…

Fulton marine jacks mount to a bracket that has holes that are 3 inches apart on center, the Jack Mounting Bracket for Fulton Marine Jack - Weld-On #P9012-00. There isn't going to be a way to mount a Fulton jack to a bracket with different…

Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure…

I was able to go out to the warehouse and measure the clamp-on mounting bracket for HydraStar EOH Actuators #HS304-7169. I made you a dimensional diagram to better see, but found that the mounting holes for the u-bolt are 13-1/8 inches by 3-5/8…

The inside width of the CE Smith Bow Roller Bracket #CE31005PG has an internal width of 3-11/16 inches so for a winch that is narrow enough to fit inside that we have the #DL16001 which measures 3-3/16 inches in width.

Yes, the Fulton F2 Fully Enclosed Trailer Winch #FW16000101 can have the handle of the winch easily installed on either side of the winch so it should work very well for you. I attached a review video for more info for you to check out as well.

The SAE number is not a reliable way to find a replacement light for the trailer. From our experience the replacement light is Optronics tail light part #ST36RB for the passenger side or part #ST37RB for the driver's side. These lights measure…