Buyers Products 10" Wheel Chock w/ 3-1/2" Handle - Heavy Duty Rubber - Qty 1

See what our Experts say about this Buyers Products Wheel Chocks

• Wheel Chock For Use With Thule RV Wheel Levelers
  What you'll do is use a separate wheel chock behind the wheels after using the Thule RV Wheel Levelers # TH307617. All you need to use is the Buyers Products 10" Wheel Chock # 337WC1086UWH.
  view full answer...
• Wheel Chock Recommendation for Use with Off Road Jeep Trailer Parked on Incline
  For larger tires like you have, the Buyers Products # 337WC1086UWH would be best for chocking your tires. This being made of rubber means that it will have great traction on your driveway and won't slip.
  view full answer...
  
• Recommended Wheel Chocks For Travel Trailer Parked on Incline For Storage
  You can store your travel trailer parked on an incline for storage, and it does not have to be perfectly level; you wouldn't want to use leveling blocks as the trailer would slide. On a big incline I highly recommend using heavy-duty rubber chocks behind the tire, and a wheel chock and lock in front. What this does is give you protection from the tire moving in two different spots, and here is what I would use in this situation: - Buyers Products 10" Wheel Chock # 337WC1086UWH - Trimax...
  view full answer...
• Can Fastway ONEstep Wheel Chocks be Used With Leveling Blocks
  That's a really good question, and while it may be technically possible to use the Fastway ONEstep Wheel Chocks for Tandem-Axle Trailers and RVs # FA84-00-4840 with blocks like the Ultra-Fab Leveling Blocks # UF48-979051, the issue is going to be how the ONEstep sets up. You could set up the wheel chocks, and with them staggered put the ONEstep in between them, but blocks like the Ultra-Fab # UF48-979051 are designed for the tires to grip them, and since they aren't flat on the surface...
  view full answer...
• Recommended Wheel Chock for 7 Ton 15,432 lb Trailer
  For your air seeding machine that weights about 7 tons, I recommend the Buyers Products # 337WC1086UWH chock. These are heavy duty weighing about 9 lbs each and will work well for your application.
  view full answer...
  
• Recommended Chock for a Boat Trailer Parked on Incline
  I recommend using the Buyers Product # 337WC1086UWH. This is a great piece of rubber to help keep your boat trailer in place. This measures 10" long x 8-1/4" wide x 6" tall and utilizes ridged sides to help provide some extra grip to the tire tread. There is also an u-bolt on these so that you can easily remove the chock when you need to get going.
  view full answer...
  
• Is There a Parking Brake Option While Trailer is Not Connected to Tow Vehicle
  I do not recommend using a parking brake of any type while the trailer is not in operation. The reason I don't is because locking the brakes up for extended periods of time can actually cause damage to the assemblies and will certainly drain the batteries. I would recommend something like the Buyers Products 10" Wheel Chock w/ 3-1/2" Handle - Heavy Duty Rubber - Qty 1 # 337WC1086UWH. Wheel Chocks will prevent your trailer from moving and these particular chocks have a nice handle.
  view full answer...
• Can MaxxTow Wheel Chocks Be Used When Loading And Unloading Boat On Ramp
  TheBuyers Products Wheel Chocks, part # 337WC1086UWH would certainly add some insurance when you are loading or unloading your boat on a ramp. These chocks measure 10" long x 8-1/4" wide x 6" tall. You want to also make sure you turn the engine off and apply the emergency brake when on the ramp. You can never be too cautious.
  view full answer...
• Recommended Wheel Chocks for a 6 x 12 Enclosed Single Axle Trailer
  For parking on a level concrete pad, most any chock would work. But a good all around chock is the Buyers Products # 337WC1086UWH that measures 10" long x 8-1/4" wide x 6" tall and is densely constructed. With this chock you will be prepared for any situation. Buy two of them for proper chocking.
  view full answer...

Do you have a question about this Wheel Chock?