etrailer RV Cargo Carrier Review - 2018 Keystone Hideout Travel Trailer Video

Yes, the 24x64 etrailer Cargo Carrier for RV Bumper, #e83YR is the built the same as the shorter version but with an extension to increase width. From the images you attached, if you remove the spare tire, you can install the 24x40 etrailer Cargo…

With a ladder on the back of your RV it is unlikely you will still be able to fold up the 24 x 84 etrailer Cargo Carrier for RV Bumpers #e96ZR. Reason why is when the carrier folds up it takes up all the space of the bumper, so unless your bumper…

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which…

You will want to take a few measurements under your 2014 Sprinter to make sure you have the clearance to be able to mount the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier, part #LC125460. As the included photo shows, these are…

The Mount-n-Lock SafetyStruts Universal Kit #MO34VR includes the Standoff Spacers #MO54VR along with drill bits and the components found in the Standard Kit #MO22FR. The standoff spacers allow for mounting on I-beams shorter than 6".

We have the 24x84 etrailer Cargo Carrier for RV Bumper, #e96ZR. From available online specs, the exterior width of the Wolf Pup is listed at 85". We also have the 64" #e83YR, a 60" wide version under part, #e99049 and a…

I have an alternate solution for you. But the Mount-n-Lock GennyGo Generator and Cargo Carriers like the #MNT34FR all measure 24-1/4" x 24-1/4" and are not expandable. For a generator your size, your best option will be a cargo…

The 24x40 etrailer Cargo Carrier for RV Bumper, #e99050 and the 24x60 etrailer version, #e99049 each have a similar design other than length and each have available option of using the 24" Extension, #e99052 to widen the carrier. These are…

The mounting brackets for the 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs #e99049 are spaced apart 27.5". The carrier is going to sit away from the brackets approximately 1/2" and higher 1-1/2" to…

If the bumper of your trailer sits lower than the bottom of the trailer body then yes the 24x40 etrailer Cargo Carrier for RV Bumper #e99050 would fit and work well. If the bumper sits up higher though it would not fit as the hardware that secures…

For your 2021 KZ Connect I recommend using one of our etrailer RV Cargo Carriers. They are available in different sizes for the size of the gear you wish to carry. Do be sure to contact your KZ dealer to determine how much weight your rear bumper…

Many RV bumper manufacturers construct their product with a plastic cap or a hinged door instead of endcap, allowing bumper to be used for storage; apparently you have this type. Open that end piece to examine if the seam has spot welds (short…