Will Cargo Carrier for RV Bumper be Able to Fold up With Ladder on RV

Question

Question:

I am considering something like the e96ZR to carry a couple of generators on the back of my RV. I do have a ladder on the back - will this prevent it from folding up? Id send pics but I am not sure how I can do that through this system.

asked by: Lee B

0

Expert Reply:

With a ladder on the back of your RV it is unlikely you will still be able to fold up the 24 x 84 etrailer Cargo Carrier for RV Bumpers # e96ZR.

Reason why is when the carrier folds up it takes up all the space of the bumper, so unless your bumper protrudes out past where the ladder is you won't be able to. If you want that folding feature, and your ladder is off to the side, a carrier with less width will be able to fold up as you can mount it on the side of the ladder. Granted they may not be able to hold a pair of generators but I did want to at last throw out the option.

For that we have the 24 x 40 etrailer Cargo Carrier for RV Bumper # e99050 or 24 x 60 etrailer Cargo Carrier for RV Bumper # e99049.

expert reply by: Kyle S

0

Answer 1

Yes, the 24x64 etrailer Cargo Carrier for RV Bumper, #e83YR is the built the same as the shorter version but with an extension to increase width. From the images you attached, if you remove the spare tire, you can install the 24x40 etrailer Cargo…

view full answer...

Answer 2

Although the #PD92201 Charge Wizard isn't absolutely necessary, it's an inexpensive upgrade that will help keep your expensive batteries in top condition. The wizard does this by automatically monitoring the charge status of your batteries…

view full answer...

Answer 3

The 24x60 etrailer Cargo Carrier for RV Bumper #e99049 is a great option for a cargo carrier for use with an RV. It fits 4" x 4" and 4-1/2" x 4" RV bumpers and can hold up to 500 lbs. As long as the bumper on your Grand Design…

view full answer...

Answer 4

The 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR is designed for 4" x 4" bumper tubes so this particular cargo carrier wouldn't be a compatible fit to attach to your trailer hitch crosstube. Instead I recommend a hitch mounted…

view full answer...

Answer 5

The 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR is going to fold up and sit on top of the mounting brackets, so anything that would sit above the bumper of your 2022 Jayco Redhawk Class C Motorhome is going to interfere with the cargo…

view full answer...

Answer 6

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 7

The MORryde StepAbove RV Steps #MR68RR would actually need to be folded up in order to get to the pins in the hinge to remove it so you would have more than enough room within that 32" of space to pull the pins and remove the steps. I've…

view full answer...

Answer 8

The distance between each of the mounting brackets of the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR is 27-9/16 inches. The picture I attached came from the install instructions which are also linked on this page as well.

view full answer...

Answer 9

We have the perfect solution but the Furrion Vision S W is not compatible with the pre wiring from Voyager. Instead the Voyager WiSight Wireless RV Backup Camera #ASA24YR is the way to go. This will allow you to use the already existing bracket to…

view full answer...

Will Cargo Carrier for RV Bumper be Able to Fold up With Ladder on RV

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching