etrailer RV Bumper Cargo Carrier Review - 2022 Forest River Salem FSX Travel Trailer Video

Yes, the 24x64 etrailer Cargo Carrier for RV Bumper, #e83YR is the built the same as the shorter version but with an extension to increase width. From the images you attached, if you remove the spare tire, you can install the 24x40 etrailer Cargo…

With a ladder on the back of your RV it is unlikely you will still be able to fold up the 24 x 84 etrailer Cargo Carrier for RV Bumpers #e96ZR. Reason why is when the carrier folds up it takes up all the space of the bumper, so unless your bumper…

The Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers #MNT34FR is meant to be mounted on the bumper of your RV and cannot be mounted to the tongue of your trailer without some pretty extreme modification and fabrication. However there…

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…

I think we may have a solution that will work for you as we offer a very wide variety of spare tire carriers. However, I would really need to see a photo of you setup in order to offer the best advise. The issue you will run into trying to find a…

For your 2021 KZ Connect I recommend using one of our etrailer RV Cargo Carriers. They are available in different sizes for the size of the gear you wish to carry. Do be sure to contact your KZ dealer to determine how much weight your rear bumper can…

Since it looks like you have C-channel on your 2021 Winnebago Micro Minnie FBS Comfort Explorer you'd have to find a welder to box the frame so that you can then install the Mount-n-Lock SafetyStruts #MO22FR that you referenced but it can fit.

If the bumper of your trailer sits lower than the bottom of the trailer body then yes the 24x40 etrailer Cargo Carrier for RV Bumper #e99050 would fit and work well. If the bumper sits up higher though it would not fit as the hardware that secures…

The mounting brackets for the 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs #e99049 are spaced apart 27.5". The carrier is going to sit away from the brackets approximately 1/2" and higher 1-1/2" to allow for…

I have an alternate solution for you. But the Mount-n-Lock GennyGo Generator and Cargo Carriers like the #MNT34FR all measure 24-1/4" x 24-1/4" and are not expandable. For a generator your size, your best option will be a cargo carrier like…

The 24x40 etrailer Cargo Carrier for RV Bumper, #e99050 and the 24x60 etrailer version, #e99049 each have a similar design other than length and each have available option of using the 24" Extension, #e99052 to widen the carrier. These are built…

You can try fitting the Stromberg Carlson Trailer Tray Cargo Carrier #CC-255 sideways but it wasn't designed to be installed that way so I recommend installing it the correct way and routing your wiring to it that way. This will fit A-Frames that…