How to Measure the Bolt Pattern on a 6x10 Trailer
Question:
I need to know what is the bolt pattern on a 2017 6x10 utility trailer
asked by: Craig
Expert Reply:
The bolt pattern of a wheel is defined by two numbers: the number of bolt holes and the diameter of the circle (in inches) that they form, measured through the centers of the bolt holes. For example, a 5 on 5-1/2 bolt pattern defines a wheel that has 5 bolt holes spaced out evenly along a circle that has a 5-1/2" diameter (see picture).
I have attached a helpful article that shows you how to measure the bolt pattern on your trailer. On an even amount of bolts you would take the measurement from the center of one bolt to the bolt directly across from it as explained in the attached article.
I have also attached a couple of links to helpful articles about tires.
Product Page this Question was Asked From
Provider ST205/75R14 Radial Trailer Tire w/ 14" White Spoke Wheel - 5 on 4-1/2 - LR C
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range C
- 205/75-14
- 14 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Taskmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Loadstar ST205/75D15 Bias Trailer Tire w/ 15" Silver Mod Wheel - 5 on 5 - Load Range C
- Shop: Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR D
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range D
- Video: etrailer E-Track Systems Roller Idler Review
- Search Results: cotter pin
- Shop: Trailer Spindle Nut 1"
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Search Results: spare tire mount
- Search Results: trailer mount
- Search Results: spare tire mounting bracket
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Q&A: How Many Hubs Come with Part # 84545UC1-EZ
- Search Results: castle nut
- Search Results: electric hydraulic
- Article: Printable Trailer Bolt Hole Pattern Template
- Search Results: ez lube bearings
- Video: Review of SAM Snow Plow Replacement Parts - Cotter Pin for Western Snowplow - 3371302250
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: Castle Nut Torque Spec for 3,500 Pound Axle
- Article: Most Popular Wheel Bearings
- Q&A: Would the Blaylock Wheel Chock part # EZ-JACK Work with Trailer Fenders
- Q&A: Can a Trailer that Requires a 2-5/16 Inch Ball be Towed Using a 2 Inch Ball
- Video: Optronics Trailer Lights - Clearance Lights - MCL44AB1 Review
- Video: CargoSmart Spare Tire Holder Review
- Video: Optronics Fender Clearance Trailer Light Review
- Video: Optronics Trailer Led Clearance Light Review
- Video: Optronics Trailer Lights - Clearance Lights - BA44FNR Review
- Q&A: Replacement Axle for Older Trailer That Uses Hubs with Obsolete Bearings
- Q&A: Is Hopkins 7-Way # HM40940 Direct Replacement for 7-Way Connector on 1999 Dodge Ram