Curt Weight Distribution Shank Review Video

Based on the two measurements you listed you would need a drop of 6-3/4 inches. The part #C17123 that you referenced would work to give you the amount of drop you would need. I also attached a help article that details how to pick out the correct…

The weight distribution system I recommend with integrated sway control that will fit a 3" tall trailer frame is the Reese Steadi-Flex Weight Distribution System part #RP66558 which is a bolt-on option. In order to use this system you will…

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I…

For your trailer to tow level using your weight distribution system, I recommend the Curt Weight Distribution Shank 13" Long #C17124. This will provide up to a 10" drop when using round bar weight distribution systems or up to 9" drop…

I'm not sure which W/D system you're speaking of, but the Curt #C17124 shank is compatible with all the Reese and Curt Weight Distribution systems we carry.

Husky has 2 different types of weight distribution shanks. One of them uses 3/4 inch diameter holes spaced 1-1/4 inches apart on center. If that is what you have then the Curt shank #C17124 will work. But if the shank you have has a smaller hole…

For a deeper drop to keep your system level, there are drop shanks available. I recommend the Curt Weight Distribution Shank #C17124 which will allow you the ability to adjust your system to work with your taller truck. I've attached a video to…

Curt weight distribution (WD) shank #C17124 is indeed compatible with a Reese head assembly and it will also work with Draw-Tite brand heads. (Reese and Draw-Tite are sister brands.) Most WD shanks made nowadays use the same 1-1/4-inch hole spacing…

The Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW #C17062 is not available without the shank. For your raised truck, you can interchange companies for the shank head, however the companies may void your…

Sounds like you have a friction sway control weight distribution (WD) system like the Reese Steadi-Flex #RP66561 or the Equal-i-zer #EQ37140ET. Pretty much all sway control setups use friction and that's what those loud popping and creaking…

You want to set the ball height adjustment so that the trailer is being towed as level as possible. Sometimes with weight distribution systems the included shank does not provide enough drop to allow this so then you would need to get a shank that…

You can use air bag suspension enhancement like the #AL88375 that fits your 2020 Ram 1500 with weight distribution systems but the trick to it is to first setup the air bag air pressure and then set up the spring bar tension of the weight…