What Is The Shoulder Length Of The Buyers Products 3 Position Channel And 5 Position Channel Bolt?

Question

Question:

What is the length of just the shoulder on Buyers part #337B9020?

asked by: Patrick

1

Helpful Expert Reply:

I took a look at the Buyers Products 3 Position Channel and 5 Position Channel Bolt and Nut Kit # 337B9020 that you mention, and this bolt is made from grade 8 steel, and has a shoulder length of 3-1/2", and an overall length of 4-1/2".

I have also included a diagram showing these two lengths on # 337B9020 for you to check out as well.

expert reply by: Bryce D

1

Shoulder Legnth
(click to enlarge)

Answer 1

Your plan could definitely work but what I would do is weld on a channel, such as #DM59601, and using a coupler such as #DM12688-95 for a 2 inch ball or #DM07678-95 for a 2-5/16 inch ball. And of course, some hardware, #PS024202, to mount the coupler…

view full answer...

Answer 2

The Buyers Products 1/4" Zinc Plated Safety Pin w/ Lanyard #3373006875 is designed to work with a pintle hitch like the Buyers Products 30 Ton Heavy-Duty Swivel Type Pintle Hook #337BP760A where the ball of one end of the lanyard connects to the…

view full answer...

Answer 3

Nearly all 2,000 lb axles have a spindle that is 1 inch in diameter where both bearings ride. If that's what you have then the bearing kit part #BK1-100 would be what you need as it fits that spindle.

view full answer...

Answer 4

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…

view full answer...

Answer 5

Yes, a 5.30 x 12 tire will fit the same rim as a 4.80 x 12 tire. Both tire sizes fit on a 4 inch wide rim. There are a couple of things to consider when changing tire sizes. First, the larger 5.30 will be approximately 1.4 inches taller than the 4.80…

view full answer...

Answer 6

Yes, you can remove your weld-on coupler and install a new bolt-on coupler that fits a 2 inch ball. There is just a few things you need to do to before and when installing. You need to know what channel size and the weight capacity you will need for…

view full answer...

Answer 7

Yes, you can absolutely drill holes in your trailer tongue to install the 10,000 lb capacity Buyers Products Straight Tongue Trailer Coupler #3370091560. This is a pretty common occurrence due to the various bolt hole patterns of straight tongue…

view full answer...

Answer 8

You can replace a 4.80-8 trailer tire with a 4.80-12 or a 5.30-12 trailer tire, but there are a few things to consider before making the change. First, 4.80-12 and 5.30-12 tires are going to have a larger overall diameter than a 4.80-8 tire, by about…

view full answer...

Answer 9

I recommend using Grade 5 1/2" x 4" bolts to install the Demco Channel Tongue Trailer Coupler part #DM12717. These would allow for the full weight capacity of the coupler to be achieved. These can be picked up at most local hardware…

view full answer...

What Is The Shoulder Length Of The Buyers Products 3 Position Channel And 5 Position Channel Bolt?

Product Page this Question was Asked From

Continue Researching