Replacing Mobile Home Trailer Hub With a Hub that is Compatible with Standard Rims and Tires
Question:
Do you have replacement hubs for house trailer axle hubs, so i can use a regular rim and tire size?
asked by: Randy
Expert Reply:
To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to obtain these measurements.
You will need to measure the seal, inner bearing, and outer bearing. It is also possible that there may be bearing numbers stamped on these parts as well, and those would be helpful in obtaining the correct replacement compatible hub. I have included a photo showing these measurement locations and possible bearing numbers.
Please be aware that mobile home axles were originally intended for a single use applications. Mobile home axles are commonly used for home made trailers since they are readily available. Since mobile home axles are not intended for continued use, replacement parts and compatible conversion parts are not usually readily available.
It is possible that there may not be a compatible replacement hub that will convert your current mobile home axle to a more traditional size of hub, that can be used with standard size rims, tires and other associated replacement parts.
If you are able to get the bearing numbers, and or the measurements on the spindles, I would be happy to see if we have anything available. However, for compatibility and safety reasons it may be easier to replace your mobile home axle with a standard trailer axle, and then compatible parts would be more readily available.
John H.
3/31/2020
I have 7-14.5 Lt Tires. With Doughnut Wheels, Rim Clamps and Nuts. [electric brakes] old trailer house, house frame cut to make a 8x18 ft trailer, carries my small tractor my hub, and lug bolts, and cover for the brakes are all one piece........can you help.....there is no numbers on the BENT hub, [hub is out of round]. Bought new tires, was told my wheel was bent, that was a lie. I can send you a pic if needed.thanks...
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 8 on 6-1/2 Bolt Pattern - 94" Long - 7,000 lbs
- Shop: Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc
- Shop: Trailer Hitch
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Search Results: bd155032
- Shop: Hopkins Pull to Test Breakaway Switch with 48" Long Cable
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Wiring
- Search Results: bul11cb
- Search Results: bul111cb
- Shop: Brake Controller
- Search Results: conversion hubs for mobile home axles
- Search Results: regulator
- Search Results: wf~8955
- Search Results: break away switch
- Q&A: Replacement Microwave for my High Pointe EC942K9E in Stainless
- Article: How to Measure a Trailer Axle
- Video: Bulldog Cast Head Coupler with Wedge Latch Review and Installation
- Video: Review of Demco Adjustable Trailer Coupler - Coupler with Channel Bracket - DM612466-52
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE23003 Review
- Q&A: Is 76" Spring-Center Measurement Abnormal for 95" Wide Trailer Axle
- Q&A: Replacement Leaf Springs for 1998 Coachmen Catalina 364 TBS
- Q&A: Replacing Lippert 5,200 lb Axle with Dexter 5,200 lb Axle 86.5 Inches Hub Face to Hub Face
- Q&A: Spring Bolt Hole Separation For 2" Slipper Spring Equalizer in Kit # AP216
- Q&A: How to Determine Hanger Spacing on a Tandem-Axle Trailer Hanger Kit for Slipper Springs
- Shop: Floor Mats
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-201-9UC3-EZ Review
Billy E.
5/18/2020
Ive got a old flatbed trailer with dexter mobile home axles. im looking to update to newer hubs. not having any luck finding them on my own. the seal is 2in the inner bearing is 1 3/8 and the outter bearing is 1 1/4