Curt Long Shank 2 inch Hitch Ball Review Video

We do have one hitch available with a 2" receiver that fits your 2018 Toyota 86. That is the EcoHitch Stealth Trailer Hitch Receiver #306-X7293. This hitch has a completely hidden design with a removable receiver. It features a bolt-on…

This mounts inside the garage overlapping the doorway. You will need to measure the inside of your RV's garage width from wall to wall for which is best fit. The LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen, #3441409775PBK is…

From past customers we have found that the TeeNee trailers use a three inch keel roller like the part #YR300Y. That being said I would need to see a picture of your setup to give you the best options we have. I did some research on your Tee Nee…

The Buyers Products Trailer Tongue Toolbox part #3371701680 does not come with mounting hardware. It can be secured in a number of different ways, most drill directly though the bottom of the box and into the frame. If you can find a way to mount the…

Yes, you can use a 2" Ball #C40018 with your 1-1/4" receiver on your vehicle. The class I receiver will require a specific ball mount as the 1-1/4" receiver has a shortened tube and only a class I ball mount will fit. The Ball Mount…

The video you referenced is actually a different air bag kit being installed on a newer Odyssey than your 2003. That is why the install information is different. In the video the Air Lift kit being installed is part #AL60815 and for your 2003 the…

According to the install instructions for the Air Lift kit part #AL60815 the control arm flange bolts get tightened to 33 ft/lbs of torque. According to the owners manual of your 2011 Honda Odyssey the lug nuts should be torqued to 94 ft lbs.

Normally the bags don't make noise if they are rubbing. What is most likely going on is a suspension component is a bit out of alignment and is causing the creaking. The solution for this is to loosen the suspension components you loosened to the…

The Air Lift Vehicle Suspension, part #AL60815 you referenced, would be a good fit on your 2010 Honda Odyssey. The installation of the Air Lift system is not extremely difficult and any local garage should be able to take care of the installation for…

It is interesting that Draw Tite has two hitch fits for your 2014 Buick LaCrosse but the part #36546 is the easier to install hitch, costs less, and has the same capacity as the part #36538 so it would be the hitch I would go with if I were you.

I can clarify all this for you. The hitch is rated to tow 3,500 lbs. and this towing capacity is issued by the manufacture of the hitch. You are going to be limited by your weakest link, which is going to be your vehicle's frame. I went ahead and…

The only hitches available for a 2018 Subaru Impreza sedan have 1-1/4" receivers; there is no option for a 2" hitch on the sedan model of '18 Impreza. The Draw-Tite #24960 and Curt #C11466 that fit the sedan are each Class I hitches…