Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review Video

Yes, you can use either piece of the Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount, #CAB-UM, in the rise of drop position to find the configuration that is best for you. I have included a link to a video review of this ball mount for you.

The Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 6" Drop - 7K #325-GH-12005 that you referenced would be a great solution for your trailer. It's adjustable in drop so you'd be able to get it exactly where…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

I do have an option for you but the Curt Trailer Hitch Receiver part #13390 on your 2015 Subaru Legacy already has the highest ground clearance (10-1/4") of any other trailer hitch receiver we have confirmed to fit your vehicle. This…

I would be happy to clarify things for you and make a couple of recommendations. You will want to use the Tekonsha item #TK57VR over the Universal Installation Kit for Trailer Brake Controller item #ETBC7. The Tekonsha is custom fit and will plug…

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a…

If you are looking for a way to 7-way trailer wiring on your 2015 Subaru Outback Wagon you will first need to start with a 4-way. For that you will want the part #C56040. (see install video). Now if your trailer doesn't have brakes all you…

The distance between the center of the ball hole and the hitch pin hole of the Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount #CAB-UM is 11 inches.

Curt adjustable ball mount #C45900 is made overseas but we do have some adjustable ball mounts that are made here in the USA such as #BWTS10040B or #AM3298. I have linked video reviews of both of these ball mounts for you.

Curt adjustable ball mount #C45900 is made overseas but we do have some adjustable ball mounts that are made here in the USA such as #BWTS10040B or #AM3298. I have linked video reviews of both of these ball mounts for you.

The Diversi-Tech Adjustable Ball Mount #DTALBM6825 that you referenced can go from 8 inches of drop to 9 inches of rise in 1 inch increments. It will do 0 inches of rise/drop as well. If you are looking for an adjustable aluminum ball mount similar…