Redarc Tow-Pro Elite Trailer Brake Controller Installation - 2018 Toyota Highlander Video

Since you already have a 4-way connector on your 2018 Toyota Highlander you need to use one of our adapter kits to convert it to a 7-way. If the trailer doesn't have brakes you only need to power its lights and the battery so you can use part…

The #RED44FR is the 331-EBRH-ACCV3, which is the 3rd version of the Redarc Tow Pro Elite controller that was originally only available in Australia; the #331-EBRH-ACCV2 is the 2nd version and has been phased out. They're really mostly the same…

The Curt Echo Under-Dash Trailer Brake Controller part #C27JR as with most any electric trailer brake controller will draw a very small amount of power even when the vehicle is off so it can save all your settings. That said, the power draw is…

I reached out to my contact at EcoHitch and she verified that the Hidden Trailer Hitch Receiver #306-X7137 will fit with the full size spare tire beneath your 2008 Toyota Highlander. You will want to lower/remove the spare during the installation…

Yes, the Mounting Panel #331-TPSI-002 will fit your 2019 Toyota Sienna for installing the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR. You don't see it on the fit list since brake controllers are not commonly installed in your vehicle.…

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

I would be happy to clarify things for you and make a couple of recommendations. You will want to use the Tekonsha item #TK57VR over the Universal Installation Kit for Trailer Brake Controller item #ETBC7. The Tekonsha is custom fit and will plug…

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

The Reese Adjustable Ball Mount - 5,000 lb #RP21141 does not offer the parts as separate pieces for purchase. You will need to purchase the entire ball mount. If you want a more cost efficient alternative that is also rated for 5,000 lbs, I recommend…

The Diversi-Tech Adjustable Ball Mount #DTALBM6825 that you referenced can go from 8 inches of drop to 9 inches of rise in 1 inch increments. It will do 0 inches of rise/drop as well. If you are looking for an adjustable aluminum ball mount similar…

Curt adjustable ball mount #C45900 is made overseas but we do have some adjustable ball mounts that are made here in the USA such as #BWTS10040B or #AM3298. I have linked video reviews of both of these ball mounts for you.

Yes, the Adjustable Ball Mount #TK5007 comes with 2 pins for the adjustable ball mount part and then a third pin for the shank. If you would like to add some locks to this then you can also get the Trailer Hitch Receiver Lock #e98881 as well. This…