How To Load And Unload A 2007 Mazda Miata MX-5 Without Scraping
Question:
2021 Aluma 8216 tilt trailer and a 2007 Mazda MX-5 Miata. Trying to determine if these ramps will prevent dragging on loading and unloading. Distance from bottom of front end to ground is 7.25inch and race ramp yardstick measurementinch is 13.25 Many Thanks.
asked by: Ron A
Expert Reply:
The longer the ramp, the less likely it is to drag or scrape. Ideally we have the perfect mixture of length and angle. I think using the ramps you were looking at # RR-RACK-4 won't be enough length and too much angle. The ramps you were looking at are only 27-1/2 inches long and have a 8.8 degree angle. That's a little too much angle over too short of a length so for sure prevent any scraping. That being said, having a 5.5 degree angle on 74 inches of ramp like on these # RR-TR-7-FLP will give you plenty of length and a small enough amount of angle to achieve what you're looking for. Luckily, your 2007 Mazda MX-5 Miata is a rather shorter wheel base vehicle so it should be plenty of ramp to eliminate all scraping.
We tested these out with a Subaru BRZ which is somewhat similar shaped car as your Miata. Check it out to see how it worked for us!
Products Referenced in This Question
Race Ramps Service Rack Ramps - 4" Lift - 27-1/2" Long - Qty 2
- Car Ramps
- Service Ramps
- 14 Inch Wide
- 4 Inch Lift
- 27-1/2 Inch Long
- Lift Ramps
- Race Ramps
more information >
Product Page this Question was Asked From
Race Ramps Trailer Loading Assist Ramps - 6-1/4" Lift - 74" Long - Qty 2
- Car Ramps
- Loading Ramps
- Enclosed Trailer
- 14 Inch Wide
- 7 Inch Lift
- 74 Inch Long
- Car Hauler Ramps
- 3000 lbs
- Race Ramps
more information >
Continue Researching
- Shop: Race Ramps Trailer Loading Assist Ramps - 7" Lift - 74" Long - Qty 2
- Video: CargoSmart E-Track or X-Track System Shelf Track Brackets Review
- Video: CargoSmart E-Track and X-Track System Board Holder Review
- Video: Durabilt E-Track Shelf Bracket Review
- Video: Review of Durabilt E-Track - E-Track Wood Beam Socket - DU64GR
- Search Results: etrack shelf
- Search Results: etrack
- Shop: CargoSmart Board Holder for E Track and X Track Systems
- Shop: Durabilt E Track Shelf Bracket - 500 lbs - Qty 1
- Shop: CargoSmart Folding Shelf Brackets for E Track or X Track Systems - 12" Deep - Qty 2
- Shop: CargoSmart Rotating Board Holder for E Track and X Track Systems
- Shop: Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs
- Shop: Rack'Em Shelf Kit for Enclosed Trailers
- Search Results: race ramps
- Q&A: Recommended Ramps for Loading Can Am Slingshot in Toy Hauler Trailer
- Search Results: e track mounting plate
- Video: etrailer E-Track Backing Plate with Hardware Review and Installation
- Q&A: How to Determine if a 2007 Jeep Grand Cherokee has a Factory Tow Package
- Q&A: Will the Saris Bones 3-Bike Rack Fit a 2017 Mazda 3 Hatchback with Spoiler
- Q&A: How to Change Out Lock Cores in a Yakima Q-Tower Roof Rack
- Q&A: Compatibility of Derale # D15748 Oil Filter Relocation Kit on Perkins 4.236 Marine Diesel Engine
- Q&A: Parts Needed to Flat Tow a 1995 Chevy Pickup Truck Behind a Motor Home
- Q&A: Why Would Trailer Hub Get Hot When Leaking Grease/Oil
- Search Results: trailer jack ram 2000
- Search Results: led interior trailer lights
- Video: Race Ramps XT Car Service Ramps Xtenders Review
- Shop: Base Plate for Tow Bar