Availability of Curt Rebellion XD for 2-1/2" Receiver

Question

Question:

Does this hitch come with a 2 1/2 inch shank and increased tow ability

asked by: Daniel F

0

Expert Reply:

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls # C57UR comes with a 2-1/2" shank. The 2-5/16" ball has a gross towing weight of 20,000 lbs which is higher than the 15,000 lbs for the # C83WR. The 2" ball capacity remains the same at 10,000 lbs.

expert reply by: Robin H

0

Answer 1

One hundred percent yes, if you are not using weight distribution you can tow your travel trailer using the Rebellion ball mount you asked about: - Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C57UR The #C57UR will fit your Ram's…

view full answer...

Answer 2

Yes, there is an option for an adjustable cushioned ball mount with 8 inches of drop that fits your 2-1/2 inch hitch, which is from Curt: - Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C57UR This ball mount fits 2-1/2 inch hitches, has…

view full answer...

Answer 3

Yes, we still offer the Curt hitch part #C15704 that you referenced. This hitch is a fit for your 2005 Dodge Ram 2500 without the factory hitch as well.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 8

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Availability of Curt Rebellion XD for 2-1/2" Receiver

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching