Stallion Aluminum Arched Loading Ramp Set Review Video

The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your truck bed…

I had the Stallion ATV Ramps #288-07432-2 measured and the spaces are 2 3/4 by 4 3/4. I included a picture of how they were measured as well. The red is 4 3/4 inches and the blue is 2 3/4 inches.

The CargoSmart Ramp Plates - Aluminum - 12" Wide - Qty 2 #3483006 is not independently rated. They will be stronger than the 2x12 board they are designed to be used on. They are designed for ATV's and Golf Carts, so I looked up the standard…

The Aluminum Ramp Ends for 2 x 8 Boards #288-07400 doesn't have anything special that holds the ramps to a tailgate and instead relies on the length and width of the plate, as well as the downward pressure applied by the weight of what you're…

While we have a great ramp set you can use, the Mad-Ramps Pivoting Ramp System #MR54FR will not work with your 10' (120") wheelbase on your Advance EV golf cart. This is because the #MR54FR only accommodates wheelbases up to 88"…

For a spare tire and wheel on your 2023 Coleman Lantern 17B use the Karrier ST215/75R14 Radial Trailer Tire - 5 on 4-1/2 - Load Range C - Galvanized Wheel #AM32182 or White Wheel #AM32181.

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hi Tyler, When adding in air springs on a lifted vehicle the proper way to determine the correct sized spacer is to first install the upper and lower brackets and then measure the distance between them and subtract the height of the air spring bellow…

If you remove the hub and wipe away the grease on the spindle you can check to see if it is damaged. Look for an scarring, gouges, discoloration, or scoring on the spindle. If the spindle is damaged then the bearings won't ride properly and can…

The Husky Center Line Weight Distribution with Sway Control 32217 is for 600 lb to 800 lb total tongue weight capacities (the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow…