How Big are the Holes on the Stallion Folding Ramp 288-07432-2?

Question

Question:

what is the distance between the cross bars on the ramp? I have a zero turn mower with smaller front tires .

asked by: Doug O

1

Helpful Expert Reply:

I had the Stallion ATV Ramps # 288-07432-2 measured and the spaces are 2 3/4 by 4 3/4. I included a picture of how they were measured as well. The red is 4 3/4 inches and the blue is 2 3/4 inches.

expert reply by: Lazer S

1

Ramp Measurement
(click to enlarge)

Answer 1

Yes, a single arched loading ramp is part #288-07432. Please keep in mind the weight rating of a single ramp is 1,500 lbs compared to 3,000 lbs for the set. The set is part #288-07432-2. I have attached a video for your reference.

view full answer...

Answer 2

I confirmed with Stallion that the thickness of the Arched Loading Ramp Set - Center Fold - Aluminum #288-07432-2 when stacked on top of each other is 6 inches when folded at the center.

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hi H.L. There isn't actually a specific weight capacity for any 5th wheel base rail kit, including the B&W Custom Installation Kit w/ Base Rails #BWRVK2401 that fits your 2016 Ford F-250. Base rails are designed to meet the tow capacity of…

view full answer...

Answer 7

The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your truck bed…

view full answer...

How Big are the Holes on the Stallion Folding Ramp 288-07432-2?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching