Loading Ram Recommendation for John Deere Gator Onto a 26" Tall Trailer

Question

Question:

I am looking for a set of loading ramps for my john deere gator xuv825m s4. The widest possible. It ways 2000 dry. Add fuel and driver plus gear 2500lbs. Trailer is 26 inches off the ground. Please give me suggestions

asked by: Chris

1

Helpful Expert Reply:

I actually really like the Arched Loading Ramp Set # 288-07432-2 you're looking at.

Together these ramps can handle up to 3,000 lbs, and they measure 18" wide which should work out really well for your Gator. We actually have a review where another customer was able to use this for loading ATV/UTVs onto their 26" tall trailer that I'm linking for you to reference.

expert reply by: Jon G

1

Loading Ramp Review for Arched Loading Ramp Set
(click to enlarge)

Answer 1

I may have another option but the we do not have a ramp or ramp set that is 57" long x 18" wide. The only 18" ramps we have is the Arched Loading Ramp #288-07432 which is 90" Long x 18" Wide and utilizes a center fold design…

view full answer...

Answer 2

I have a solution for you.The main concern I would warn you about in this scenario is that if the weight that is either distributed on the ground or on the trailer exceeds 1500 pounds for even a brief instant, it could not just potentially damage…

view full answer...

Answer 3

The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your truck bed…

view full answer...

Answer 4

We have ramps that will work perfectly for loading your 1690lb UTV into the bed of your truck. I recommend the Arched Loading Ramp Set #288-07432-2 which is 90" long x 18" wide and has a combined weight capacity of 3000lbs. The included…

view full answer...

Answer 5

Yes you can just swap out the bars on your Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ64FR with the Replacement Spring Bar for Equal-i-zer Weight Distribution Systems #EQ90-02-1499.

view full answer...

Answer 6

What will help prevent the bottoming out is a ramp set that is longer and has a bit of an upward bow like the #288-07489 has. Without knowing the length of your current ramps I can't say if these would be an improvement in that area. These are 65…

view full answer...

Answer 7

For most golf carts you want to go with a 1,000 lb capacity loading ramp. I would however recommend the Erickson Arched Ramps part #EM07486 as they have a 3,000 lb capacity, an aluminum construction which will make them lightweight, and straps that…

view full answer...

Answer 8

The Stallion #288-07432-2 folding cargo ramps are manufactured in China. If you'd prefer a US made alternative, I'd recommend the Gen-Y #325-GH-R84 84 inch long aluminum loading ramps. If you click the provided link, you can see a product…

view full answer...

Answer 9

The safest way to secure a 4-wheeled vehicle like a golf cart in a truck bed is to use wheel nets that secure to the truck bed in some manner. The Erickson E-Track Tie-Down Kit #EM09160 is one option that is similar to the Pack 'Em kit you…

view full answer...

Loading Ram Recommendation for John Deere Gator Onto a 26" Tall Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching