US Manufactured Loading Ramps

Question

Question:

Where is this Stallion ramp manufactured?

asked by: Bob

0

Expert Reply:

The Stallion # 288-07432-2 folding cargo ramps are manufactured in China.

If you'd prefer a US made alternative, I'd recommend the Gen-Y # 325-GH-R84 84 inch long aluminum loading ramps.

If you click the provided link, you can see a product demonstration video for the Gen-Y ramps.

expert reply by: Mike L

0

Answer 1

I have a solution for you, but unfortunately the Arched Loading Ramp #288-07432-2 set have a maximum safe height of 35", so they would not work for your 37" tall truck bed. You may want to try the Erickson Arched, Aluminum Loading Ramp Set…

view full answer...

Answer 2

The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your truck bed…

view full answer...

Answer 3

I really like the Arched Loading Ramp Set #288-07432-2 because they are a little longer at 90", they have a wider 18" base than standard ramps, they are made of aluminum so you don't have to worry about rust, and they fold up for easier…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

US Manufactured Loading Ramps

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching