Truck Bed Cargo Camera Installation - 2018 Chevrolet Silverado 2500 Video

So the Custom Third Brake Light Camera for Aftermarket Monitor #3460012 is only designed to work with trucks that do not already have a factory reverse camera, and also wouldn't allow you to use your existing display. Since you mentioned you…

Since your Keystone Montana has the max turn technology nose you can install a Reese Goose Box like part #RP85FR that you referenced and tow it with a short bed truck and have needed clearance. A standard width nose would give you clearance issues…

I contacted the manufacturer about the wires and turning off the guidance lines on the Custom Third Brake Light Camera for 8" Factory Monitor #3460010. What they said was to go to the camera and the main cable coming off of it has 2 sets of…

I do have an installation video of the Truck Bed Cargo Camera for 8" Factory Monitor part #3460010 on a 2018 GMC Sierra 3500 (see below) but we have not yet had the chance to install this on a 2015 Chevrolet Silverado 2500. That said, the…

Since the Custom Third Brake Light Camera for 8" Factory Monitor #3460010 that fits your 2019 GMC Sierra displays on the monitor on your dash which also controls the stereo it's only active when the vehicle is in reverse. A better option for…

The Self-Stripping Connector with Waterproof Sealant part #SWC501746-1 can be used in place of the Quick Splice Wire Connector part 564 (No Longer Available) to install the Truck Bed Cargo Camera for 8" Factory Monitor part #3460010 on your 2015…

For your 2018 Chevy Silverado 2500 we have a third brake light camera kit available with the #3460010 which does tie into the display on the dash of the truck like you asked about as well. You'll install a small switch too on your dash that will…

Yes, you can use the toggle switch for your truck bed cargo light with the Truck Bed Cargo Camera for 8" Factory Monitor part #3460010. The power lead that goes to the light would then need to be rerouted to the camera. The Truck Bed Cargo…

In regards to the Custom Third Brake Light Camera part #3460010 which is a fit for a 2017 Chevrolet Silverado 2500 with 8" monitor, the plug location is indeed behind the glove box. In regards to the Custom Third Brake Light Camera part #3460011…

While we don't have access to the printed install instructions for the Truck Bed Cargo Camera #3460011 that you referenced you can get a pretty good idea what the install is like by checking out the review video I attached. Around the 1:19 mark…

The camera of the GCH Truck Bed Cargo Camera #3460010 adjusts inside a ball and socket. You can just rotate the camera around and swivel it inside that socket. I attached a picture that shows the ball pointed down like you are wanting. If your socket…

The difference between the 1621 and the 1621SHD is weight capacity and how many bolts is required to mount it. The 1621 uses 4 bolts for mounting. The 1621SHD requires all 6 bolts to be used.