Trailer Wiring Harness Adapter Installation - 2011 Ford E-350 Van Video

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest…

For the adapter #30717 to function, the white wire has to be grounded to the vehicle frame. Without that ground it will not function. If it is properly grounded and you still do not have lights on the trailer, make sure that the adapter 7-Way and…

To use the Curt Echo Wireless Trailer Brake Controller #C51180 on your 2019 Ford Ranger with a factory 4-way connector you will need to install the Tekonsha 7-way connector #22124. This connector includes a harness custom made for your vehicle and…

To use the Curt Echo Wireless Trailer Brake Controller #C51180 your vehicle only needs 12 volt, ground, and turn signals connected to its 7-way socket. What this means is you do not need the brake signal from the 7-way. For example, if you used a…

The Curt Echo Mobile #C51180 that you referenced would plug right into the 7-way of your 2015 Toyota Tundra. Your truck having a 7-way and 4-way combo would not be an issue at all. You'd just open the 7-way side and slide the controller in…

The vehicle is unlikely to have the connector behind the dash unless it has the factory equipped 7-way on the rear bumper. If it does, the connector that the controller would plug into is clipped to the rear of the small cubbyhole or coin tray in…

For the channels you have on top of your 1999 Chevy Silverado the Rhino Rack Vortex Aero bars part #Y02-490B-NT would be a great option that comes with everything needed to install 59 inch aero shaped bars.

Thanks for the photo, and yes, the LockNLoad will indeed fit to Rhino-Rack Vortex aero crossbars like your Rhino-Rack Vortex Crossbars for Retrax XR #RRVA180B-RRRLT600. You'll just need adapters to mount the platform, and here are the part…

For your 2018 Nissan Titan XD I recommend the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. The kit comes with 4 quick mount legs that mount in the track system of your XR tonneau…

From the sounds of your question, it sounds like you have factory track OEM rails on the roof of your 2015 Jayco 1207UD Say Series camper. If this is the case, I recommend the following parts: - Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex…

For your Undercover SE Tonneau cover on your 2019 Chevy Colorado you can use the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 59" Long #Y02-490B will work by simply trimming the tracks as you mentioned.…

Unfortunately, we do not have a harness for your 2014 Ford E-350 that will plug into the connector in your photo. For a replacement you can hardwire in the #HM40975-11998 to install a 7-way connector. You can either cut off the connector you have…