Roof Rack that Fits Tracks on Top of Chevy Silverado SnugTop

Question

Question:

I am looking for 4 foot packs and cross rails that will work with these roof rails on my 1999 Chevy Silverado SnugTop topper . Can you help me. See picture below. Thank you.

asked by: Dr. P

0

Expert Reply:

For the channels you have on top of your 1999 Chevy Silverado the Rhino Rack Vortex Aero bars part # Y02-490B-NT would be a great option that comes with everything needed to install 59 inch aero shaped bars.

expert reply by: Jameson C

0

Roof Rack Channels
(click to enlarge)

Answer 1

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 2

Thanks for the photo, and yes, the LockNLoad will indeed fit to Rhino-Rack Vortex aero crossbars like your Rhino-Rack Vortex Crossbars for Retrax XR #RRVA180B-RRRLT600. You'll just need adapters to mount the platform, and here are the part…

view full answer...

Answer 3

From the sounds of your question, it sounds like you have factory track OEM rails on the roof of your 2015 Jayco 1207UD Say Series camper. If this is the case, I recommend the following parts: - Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero…

view full answer...

Answer 4

For your Undercover SE Tonneau cover on your 2019 Chevy Colorado you can use the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 59" Long #Y02-490B will work by simply trimming the tracks as you mentioned. There…

view full answer...

Answer 5

For your 2018 Nissan Titan XD I recommend the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. The kit comes with 4 quick mount legs that mount in the track system of your XR tonneau and…

view full answer...

Answer 6

The vehicle is unlikely to have the connector behind the dash unless it has the factory equipped 7-way on the rear bumper. If it does, the connector that the controller would plug into is clipped to the rear of the small cubbyhole or coin tray in the…

view full answer...

Answer 7

We have the Hopkins 4-way part #HM11140665 which is designed to fit the square connector you send in a picture of that would work well for you.

view full answer...

Answer 8

Unfortunately, we do not have a harness for your 2014 Ford E-350 that will plug into the connector in your photo. For a replacement you can hardwire in the #HM40975-11998 to install a 7-way connector. You can either cut off the connector you have and…

view full answer...

Answer 9

On your 2002 Ford F-250 you will need to connect the Red wire to the Black wire on the brake controller for +12 Volts power and the Light Green wire to the Red Stoplight wire on the brake controller. The Dark Blue wire is connected to the Blue wire…

view full answer...

Answer 10

It is not necessary to wire a fuse inline of the brake controller circuit blue wire. In fact, if you did install a fuse and the fuse would somehow blow while your are in transit, you will loose your trailer brakes. The amperage that is sent to the…

view full answer...

Answer 11

According to your 2014 Ford F-250, the fuse number 26 (30A) is trailer tow park lamps. You will also want to check relay 29 for trailer tow park lamps. Fuse number 70 (10A mini fuse) is for trailer tow backup lamp and relays 74, 75, 76 are for…

view full answer...

Roof Rack that Fits Tracks on Top of Chevy Silverado SnugTop

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching