Trailer Wiring Harness Adapter Installation - 2009 Ford Van Video

I'm guessing whoever it was asked for your VIN to try to determine if you have the standard E-350 or the Super Duty which is the extended model. It looks like the standard, or Econoline/Club Wagon, uses the square plug you have seen like what…

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

The vehicle is unlikely to have the connector behind the dash unless it has the factory equipped 7-way on the rear bumper. If it does, the connector that the controller would plug into is clipped to the rear of the small cubbyhole or coin tray in the…

For a jacketed bundle of 7-wires sold by the foot to go with the part #PK11700 you would want the part #DW04914-1 which is sold by the foot.

For the channels you have on top of your 1999 Chevy Silverado the Rhino Rack Vortex Aero bars part #Y02-490B-NT would be a great option that comes with everything needed to install 59 inch aero shaped bars.

I have exactly what you need to install a 7-way trailer wiring harness on a 2001 Ford E-350. That said, they don't make a direct plug and play 7-way for this vehicle so you will need to start with a 4-way first like the T-One Vehicle Wiring…

The blue output wire to the trailer brakes on your 2000 Ford Van will need to be manually run from the brake controller back to the plug in the rear. The brake controller power supply and brake pedal wires are already run. Since your Van has a 4-Way…

For your 2018 Nissan Titan XD I recommend the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. The kit comes with 4 quick mount legs that mount in the track system of your XR tonneau and…

For your Undercover SE Tonneau cover on your 2019 Chevy Colorado you can use the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 59" Long #Y02-490B will work by simply trimming the tracks as you mentioned. There…

Thanks for the photo, and yes, the LockNLoad will indeed fit to Rhino-Rack Vortex aero crossbars like your Rhino-Rack Vortex Crossbars for Retrax XR #RRVA180B-RRRLT600. You'll just need adapters to mount the platform, and here are the part…

We have the Hopkins 4-way part #HM11140665 which is designed to fit the square connector you send in a picture of that would work well for you.

It is not necessary to wire a fuse inline of the brake controller circuit blue wire. In fact, if you did install a fuse and the fuse would somehow blow while your are in transit, you will loose your trailer brakes. The amperage that is sent to the…