Reese Quick-Install Base Rails Kit Installation - 2009 Ford F-150 Video

We do carry a custom 5th wheel installation kit for your 2001 Ford F-150. Take a look at the Fifth Wheel Trailer Hitch Custom Rail and Install Kit, #RP50081-58. I have included a link to the installation details and a video showing a typical…

For just 5th wheel base rails and an installation bracket kit you can use with your existing Reese hitch you can use part #RP50081-58. This is a custom kit that will reduce drilling and overall installation time. This one kit will fit all three bed…

Thanks for the information on your trailer. For your axle with brakes I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 #AKHD-655-6-EZ-K if you have the spindles with the integrated grease…

I may have a solution that would work, but the #IMF18821 comes with adapters for 1-1/4" and 1-3/4" bars and the 1-5/8" bars on the Thule TracRac are going to be a bit too small for this. Additionally, all of the round bar ratchet…

In regards to the Curt Custom Fifth Wheel Installation Kit part #C16400-204 which is a fit for a 2017 GMC Sierra 1500, the distance from the edge of the truck bed to the edge of the forward-most rail is 47-1/2" on both the 5-1/2' and…

If the hitch model you referenced is the Lil Rocker, it will fit in Reese 5th wheel rails. For an installation kit that will also fit your 2009 Ford F-150, I recommend the custom installation kit #RP50081-58 that you have referenced. The custom…

The correct placement will depend on which install kit you are using. I would recommend using a custom kit like the one offered by Reese, part #RP50082-58. The installation instructions for the #RP50082-58 (see link) state that the rear of the back…

When installing a universal Reese fifth wheel rail kit like the #RP30035 the rear rail edge will need to be exactly 32-1/2 inches from the rear edge of the truck bed. Once you have that placed you can then use a hitch to line up and place the front…

In general when installing a set of fifth wheel rails the rails will need to be located in the bed of the truck so that the center of the fifth wheel hitch head is centered above the rear axle. But for your 2015 Ford F-150 5-1/2 ft bed we have the…

For your 2005 Ford F-150 with a 5-1/2 foot bed you will need to start with a custom fifth wheel install kit like part #RP50081-58. A custom install kit will minimize drilling and will cut install time in half when compared to a universal one. Now to…

The overall weight of the Buyers Products Over-The-Cab Truck Bed Ladder Rack #3371501150 is 144 lbs but it installs in several pieces so you would not be required to lift 155 lbs at a time at any given point. Install of this is very possible with one…

Thanks for the photo of the rack you have. I called my contact at TracRac about this rack and fitting it to a 2004 Tacoma. Unfortunately, they told me there are no components available any longer, and this rack was designed for full size pickups and…