Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
(29 reviews)
Price: $373.77
Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
Item # RP50084-58
Our Price: $373.77
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (29)
- Q & A (0)
- Videos (1)
- Photos
2014 Toyota Tundra - Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Above the Bed
- Reese
- Custom
Custom brackets reduce the amount of drilling and time required to install your fifth-wheel trailer hitch. Brackets, base rails and hardware included.
Features:
- Custom brackets mount beneath your truck bed to provide attachment points for 5th-wheel rails
- Base rails sit in truck bed and allow installation of 5th-wheel trailer hitch
- Vehicle-specific brackets mount to existing holes in your vehicle's frame
- Minimizes drilling and measuring
- Cuts installation time in half when compared with universal bracket systems
- Kit includes custom brackets, rails and hardware
- Compatible hitches: Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky
- Will not fit Reese Elite Series (Signature Series) or Valley UBS hitches
- Black powder coat finish resists corrosion
- 5-Year limited warranty
50084-58 Reese Custom Quick Installation Kit
Installation Details
Video of Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Reese Fifth Wheel Custom Installation Kit - Toyota Tundra - RP50084-58
Michael: Hi, I'm Michael with etrailer.com. Today, we're going to be taking a look at the Reese Quick-Install Custom Installation Kit for Fifth Wheel Trailer Hitches. This kit is going to work for your 2007 through 2019 Toyota Tundra trucks. It's going to include everything you need to get your Fifth Wheel Hitch hooked up to your Toyota Tundra. The kit includes your custom brackets, your rails, and all your hardware. These custom brackets, they mount to the frame of your Tundra beneath the bed, and they provide the attachment points for your Fifth Wheel rails.
The rails sit inside the bed and they are what your Fifth Wheel Hitch attaches to. The nice thing about these custom brackets is that they use the existing holes in your Tundra's frame, so you're not going to have to do nearly as much drilling, which in turn is going to make the install a lot faster and could cut the install time down to about half of what you would get with your universal bracket systems.You are going to have to drill through your truck bed to make the attachments between your brackets and your rails, but that should be the only drilling that you really have to do. This kit is compatible with a lot of different types of Hitches. So, whether you have a Curt or Draw-Tite, Hidden Hitch, Reese Valley or Husky Hitch, it's going to work great. There are a few Hitches that it will not work with, which would be the Reese Elite Series, Signature Series, or the Valley UBS Hitches.
The rails and the brackets are made out of a solid steel construction, and they have a nice black powder coat finish that's going to help them resist any rust and corrosion.Our rails are 43 inches long. They're going to be five and three fourths inches wide, and they're going to stick up about an inch and an eight. So, keep that in mind. This is a permanent installation, so you are going to have to live with these in the back of your truck. So, if you're doing things other than hauling your Fifth Wheel, and they might be cumbersome, might reduce some of the bed access you have, but they are going to work really well for pulling your Fifth Wheel Hitch.
They do come with a five-year limited warranty from Reese, and that's going to complete our look at the Reese Quick-Install Custom Installation Kit for your Fifth Wheel Trailer Hitches..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches - RP50084-58
Average Customer Rating: 4.6 out of 5 stars (29 Customer Reviews)
Custom brackets reduce the amount of drilling and time required to install your fifth-wheel trailer hitch. Brackets, base rails and hardware included.by: Larry07/29/2023
Enjoy putting it in I’m retired took my time Put about 5000-6000 tows great pull a 31 ft 5thwheel pulled a2017 Toyota trunda
by: Randy M.03/23/2017
2015 Toyota Tundra
VERY IMPRESSIVE Custom kit ! The RP50084-58 makes universal types a why bother option. I've done one and comparing the drill time saving and odd angling L straps you get with them, these meaty and made for, no guess work brackets are what makes this kit a no brainer. So pleased I chose it to haul our 30ftr. with my Tundra. Instructions are good and hardware is top notch. I'm 60 yrs. old and did it alone in my driveway if that helps anyone's decision LOL! Love your products and your company etrailer
by: Mike D.04/06/2020
The Quick Install Installation Kit made installation of the 5th wheel hitch in my 2014 Tundra fairly easy. (It's still work, but makes it possible for someone with mechanical ability to get it done) I would highly recommend the kit as well as etrailer.
Note: I did not need to remove my rear air bags as claimed by etrailer. The air bags and hitch worked together just fine.
by: Mike12/28/2023
Works very well
by: Gary12/21/2021
the best part of this kit was the brackets fit my truck perfectly . A template to lay in the bed for rail hole configuration would have been a great help . the big reason I rated this a 3 star is I live in the country and had to drive 30 miles to get the correct bolts needed to mount the rails { the kit was missing 8 carriage bolts , lock nuts and washers }
by: Gary W07/20/2020
2019 Toyota Tundra
This was our 2nd rail installation. The first was just a rail kit for a a toyota tundra. The second was a "specific custom rail kit" for our new 2019 Toyota Tundra. Well worth the money. It installed easily with no frame drilling. Order a custom rail kit for your truck, you will not regret it.
by: Stan03/10/2023
no instructions was able to download from website they where fairly clear
but there is room for some improvment I have done mechanical work most of my life Iam 67 so i try to be fair in my evaluation this is a good product would buy again
by: Robert07/08/2019
Well made product. Custom fit means only drilling is in the truck bed. The rear most bolts on the front and rear rail are a major pita to get to. All 4 are basically hidden between the frame and bed. Defiantly a 2 person job. Only option on tightening is an open end wrench and lots of cramps from being a contortionist trying to find them. Overall I would buy again, but let someone else install??
by: Jeff 06/13/2020
Custom rail kit was great. Directions are really good and easy to follow. Bracket pieces are very heavy duty. Was happy with everything other than they use UPS and it’s always a delayed delivery in our area now with the Covid thing it gives them a excuse to have late deliveries non-stop! Was Two days late! Excellent Product! Excellent Company!
by: Jason07/21/2022
2020 Toyota Tundra
Rails came in poor packaging missing parts that fell out through the holes. That said, the rest of the product was good, and installed as expected…after replacing the missing hardware
Brooke M.
7/26/2022
Well I will pass this along to our customer service team to see if we cant get you all the parts that you paid for. Thanks for letting us know!
by: Richard 04/19/2019
The product was excellent but installing it was quite a job. Once I got it in it was great. No complaints
Richard
4/20/2020
Havent had any issues with this fifth wheel package. I would recommend it to anyone that needs one. Great customer service also.
by: Brian06/17/2016
2007 Toyota Tundra
Great package. Had it for a year and not one nut and bolt has loosened. My 1/2 ton Toyota tows my 28' fifth wheel no problem.
by: Pedro 03/31/2023
Shipped out fast and arrived exactly as described.
by: Roger05/29/2019
2016 Toyota Tundra
Product arrived in the scheduled time and was relatively easy to install with some minor difficulties due to Toyota tundra chassis.
All in all very happy with the product and Etrailer.
Would not hesitate to order from them again.
by: Andy R.03/23/2020
Got product very quick, all parts there, directions very good, very happy with my product and etrailer.com...
by: Walter 05/27/2021
I started to install myself but ran into a problem. So then went to a place to have installed. Only costed me $700. to have installed the installer was amazed with it. He said it was a lot more easy compared to the company’s.
by: Doug04/07/2019
the product was very good and high-quality the directions not so much thay where someone confusing it took me a lot longer than I thought it would probably 8 hours
by: Vernon04/19/2019
Haven't installed yet but appears as quality equipment, very helpful when ordering, confirmed I was ordering the right equipment, order was placed on Monday AM and received Wednesday afternoon in South Alabama.
by: Bud06/05/2016
2008 Toyota Tundra
A little aggrevating to install, but no drilling except in bed
by: RHH06/17/2017
Great Customer service---Knowledgeable about product--fast shipping--great experience--good prices
by: Steve M10/20/2019
This kit was exactly what I needed! I installed myself and saved a bunch. Thank you.
Steve M.
10/25/2020
No problems! It was exactly what I needed
by: Dennis05/30/2016
Great product.
EXCELLENT SERVICE!!!!!!!!!!
Thanks again Tom,
Dennis Ballentine
Minnewaska Motors
by: Gary R.07/12/2020
Working great. No issues. Would buy all over again.
by: Ed10/12/2021
Great service and quality will use agai n.
by: Scott08/27/2019
2016 Toyota Tundra
worked perfect for my 2016 tundra crewmax,
25
29
Show More Reviews
See what our Experts say about this Reese Fifth Wheel Installation Kit
- How to Tow a Fifth Wheel Trailer with a 2013 Toyota Tundra with a 5-1/2 ft BedI have a solution that will allow you to tow a fifth wheel with your 2013 Toyota Tundra Crewmax, but since you have a 5-1/2 foot bed a slider hitch wouldn't give you enough clearance to make tight turns. Instead you will need a Sidewinder pin box replacement for the trailer you plan to tow and will be able to use your slider hitch part # RP30051 but it will have to remain in the forward most position. If you didn't have a hitch a stationary hitch like part # RP30047 would be a better choice. You...
view full answer... - Is Sidewinder Required for 5-1/2 Foot Bed on 2013 Toyota TundraThe 5-1/2 foot bed of your 2013 Toyota Tundra will require the use of a Sidewinder in order to safely make a sharp turn with your fifth wheel trailer. With a bed that short, and any type of sharp turn, the trailer will crash into your Tundra, resulting in significant damage. To find the correct Sidewinder what you will need to know is the manufacturer and model number of the pin box on your fifth wheel and match that with the correct replacement. For example, Sidewinder # RP34FR will...
view full answer... - 5th Wheel Trailer Hitch Install Kit for 2007 Toyota Tundra Long Bed and RBW Lil Rocker HitchThe RBW Lil Rocker should fit industry standard rails as long as the hitch mounting feet measurements on center match the measurements of the industry standard rails, see picture. If it does match then you have several installation kit options for your 2007 Toyota Tundra with 8 foot bed. For a semi-custom kit that will require some drilling into the truck frame you can use # RP30035-309. I have linked the installation instructions to the right for you. For a custom kit that does not require...
view full answer...
- 5th Wheel Base Rail Kit and Hitch Compatibility with 2013 Toyota TundraThe 26 inch on center brackets do not make sense to me. The standard 5th wheel base rails are 22 inches by 20-1/2 inches where the majority of hitches fit and in some cases are 22 by 29 inches. The 26 inches makes me think you may have a different style or are measuring in a different location as there aren't hitches I'm aware of with a 26 inch base. My recommendation for your 2013 Toyota Tundra is the Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches...
view full answer...
- Custom Installation Brackets, Part # V55151R for Installing Fifth Wheel Hitch on 2009 Toyota TundraYou would need the Fifth wheel Hitch Custom Installation Kit with Rails for the Toyota Tundra, part # RP50084-58. Since your truck has the short bed, you will want to make sure you are using either a fifth wheel hitch with a slider or a Sidewinder to prevent the front of the trailer from striking and damaging the rear of the truck cab. The sliding fifth wheel hitch will typically gain you 10-12 inches of additional clearance between the trailer and the cab, while the Sidewinder will gain...
view full answer... - Recommended 5th Wheel Hitch for 2007 Tundra Short Bed Pulling Trailer with Lippert Turning PointIf the trailer you are looking at is equipped with the Lippert Turning Point Pin Box then you will be able to use a fixed 5th wheel hitch on your 2007 Toyota Tundra short bed truck. This is because the pivoting mechanism on the pin box will provide the necessary cab clearance during sharp turns. For the hitch I recommend taking a look at the Reese M5 # RP30928 because of its forged single piece jaw that wraps completely around the trailer's king pin for a really secure connection and...
view full answer... - Frame Brackets for Reese 5th Wheel Install Kit on 2021 Toyota TundraAssuming that the bed rails you have are from Reese, you'd need the # RP50084 frame brackets. (You want to ensure that the frame brackets and bed rails are from the same manufacturer). You'd also want to go with the # RP58504 bolt kit to fasten the bed rails to the frame brackets. The existing hardware for your bed rails isn't meant to be torqued multiple times, so it's recommended that new hardware be used. Also, keep in mind that unless your truck has the 8 foot bed, you likely won't...
view full answer... - Reese Fifth Wheel Rail Kit Recommendation for 2018 Toyota Tundra Short BedThe fifth wheel rail kit you'll want for your 2018 Toyota Tundra is the Reese custom rail kit part # RP50084-58 because a custom install kit will minimize install time and drilling into the vehicle frame when compared to a universal kit. I attached a link to this page that has the install instructions that will walk you through the install process.
view full answer... - Brackets and Mounting Hardware to Install ProSeries 15K 5th Wheel in 2013 Toyota TundraYou have several options for 5th wheel installation kits for your 2013 Toyota Tundra to enable use of your ProSeries 15K 5th wheel hitch. The part you referenced, Reese Universal Base Rail Kit # RP30035-309, is one option. Universal kits like this are cost-effective but require more drilling and take more time to install than semi-custom or custom kits. This kit will work with all bed lengths. If you prefer reduced drilling and install time you may prefer custom install kit # RP50084-58...
view full answer... - How To Tow a 5th Wheel Trailer with a 2011 Toyota Tundra CrewMaxYes, for a 5th wheel install kit that will fit your 2011 Toyota Tundra CrewMax with the 5-1/2' bed I recommend using the Reese Quick-Install Custom Installation Kit part # RP50084-58. The Reese Quick-Install Custom Installation Kit is a custom fit for your Tundra which means no drilling into the frame is required. It comes with industry standard above bed base rails that will accept a 5th which hitch like the Reese 16K 5th Wheel Trailer Hitch part # RP30047 which is what I recommend you...
view full answer... - Can 2017 Toyota Tundra SR5 Tow 2020 Forest River 286RL Fifth Wheel TrailerYour 2017 Toyota Tundra definitely has the capacity to tow a 2020 Forest River 286RL with about 1,400 lbs of extra capacity to spare. So as long as you don't plan to load the trailer with more than 1,400 lbs worth of cargo your truck would work great and be totally safe. The Reese fifth wheel hitch part # RP30081 that you referenced is an excellent choice for a fifth wheel hitch. It has a hook jaw design that wraps around and holds the king pin of the trailer very tightly which gives...
view full answer... - Determining if Andersen Ultimate Connection will Provide Enough Cab Clearance for 2013 Toyota TundraThe Andersen Ultimate Connection 5th Wheel Trailer Hitch System # AM3200 referenced in your question features a 9 inch offset to help with cab clearance. To see if this will be enough so that you can make 90 degree turns with your Toyota Tundra that has a 6-1/2 foot bed, there is a simple formula you can use: (A + B) - C = Clearance A = Distance from the fifth wheel jaw center to the truck cab (Since you don't have a hitch installed yet, you can use the center of the rear axle to the cab) B...
view full answer... - 5th Wheel and Rail Recommend for 2010 Toyota Tundra 2018 Grand Design 230RL w Lippert Turning PointThe Lippert Turning Point pin box is basically a pivoting pin box similar to the Sidewinder and Reese Revolution pin boxes. Since you have one of these you can use a stationary fifth wheel hitch in the bed of your 2010 Toyota Tundra and would not need to use a slider hitch since the additional clearance you need will come from the Lippert Turning Point pin box. Since you have this pin box your hitch options become somewhat limited. You can't use a fifth wheel to gooseneck adapter like...
view full answer... - Will The Reese 5th Wheel Hitch Fit A 2017 Toyota Tundra The Reese 5th Wheel Trailer Hitch # RP30047 would be a fit for your 2017 Toyota Tundra along with the appropriate base rail kit # RP50084-58. If you have a 5-1/2' bed then you'll need to have a rotating pin box on the trailer in order to have enough turning clearance so that the nose of the trailer doesn't come into contact with the cab of the Tundra. You'd also need an appropriate wedge kit to lock the king pin of said rotating pin box in place. If you don't have a rotating pin box the...
view full answer... - 5th Wheel Above-Bed Base Rail Installation Kit for 2015 Toyota Tundra Long-BedWe can help you with an above-bed 5th wheel base rail setup for your long-bed 2015 Tundra. I suggest a custom kit to reduce your drilling and overall installation time. All such custom kits are shown on the linked page, but the one I recommend is the Reese kit # RP50084-58 because it will have the shortest install time. Installation instructions and a helpful article are included for you. If you also need a 7-way wiring harness for the bed you can use part # 50-97-410.
view full answer... - Installation Kit for Transferring Fifth Wheel Hitch From 1997 Chevy Silverado to 2010 Toyota TundraTo install your hitch onto your Tundra, you will need the installation kit, part # RP50084-58. Since you installed the hitch onto your Silverado, you should be able to handle the install on the Tundra with no problem. If you should find that the clearance provided by the slider is insufficient, I would suggest taking a look at the Sidewinder. The Sidewinder would replace the pin box on your fifth wheel trailer, and would provide 22 inches of additional clearance between the rear of the...
view full answer... - Fifth Wheel Bracket Kit for Rails for a 2008 Toyota TundraDo you know what brand rails you have? We can't recommend mixing rail and bracket manufacturers but if you have the very popular brand Reese then the hardware kit you would need is the part # RP50084. If you can't find the brand the safest recommendation I could make then would be the part # RP50084-58 which includes new rails as well. If you do go with just the bracket kit you will also need the hardware kit part # 58164 to attach the rails to the brackets.
view full answer... - Parts Needed to Add Reese 5th Wheel & Firestone Ride-Rite Air Bags to 2015 Toyota Tundra CrewMaxWe can get your 2015 Toyota Tundra CrewMax set up to tow a 5th wheel trailer with a 16,000 lb Reese 5th wheel hitch and Firestone Ride-Rite air bags. These are great choice as Reese is well-known for the quality of their 5th wheel hitches, and the Ride-Rite air bags are compatible with 5th wheel hitch so your Tundra is going to get the support it needs. Here are all the parts that will fit your Tundra so you can get hitched up and hit the road: - Reese 5th Wheel Trailer Hitch # RP30047 -...
view full answer... - Slider 5th Wheel Hitch and Rail Kit Recommendation for a 2007 Toyota Tundra with a 6-1/2 ft BedYou could install the head from your Reese 5th Wheel Trailer Hitch # RP30047 (just the head is part # RP30047A) on the Reese Square Tube Slider part # RP30048 that you referenced. For a rail kit the Reese 5th Wheel Rail and Install kit part # RP50084-58 that you referenced would be an excellent choice. This is a custom install kit that will minimize drilling into your 2007 Toyota Tundra and will install in about half the time as a universal kit.
view full answer... - Fifth Wheel Hitch and Installation Kit Recommendation for a 2008 Toyota Tundra with 5-1/2 ft BedThe Reese # RP30047 would be an excellent choice for you. This is one of the nicest hitches on the market. Because of its jaws that make 360 degree contact with the king pin and the fact that it has heavy-duty vibration dampeners to minimize rattle and noise. Now for a custom rail kit that will install in the bed of your 2008 Toyota Tundra in about half the time as a universal kit and will minimize drilling I would recommend the Reese Quick-Install Custom Rail Kit part # RP50084-58. The...
view full answer... - Fifth Wheel Hitch Recommendation for a 2010 Toyota Tundra with 5-1/2 ft BedFirst let's start with a fifth wheel rail kit confirmed to fit your 2010 Toyota Tundra. For that you will want a custom install kit like the part # RP50084-58 that will minimize drilling and cut install time in half when compared to a universal kit. Since your truck bed is so short the only way you will to make sharp turns is if you replace the pin box of the fifth wheel trailer with a Sidewinder pin box. You will need to remove the pin box of the trailer and replace it with a Sidewinder...
view full answer... - Fifth Wheel Base Rails For 2021 Toyota TundraFor a set of fifth wheel rails confirmed to fit your 2021 Toyota Tundra that the best option is a no-drill kit, the Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # RP50084-58. With these rails installed a hitch like the Reese 5th Wheel Trailer Hitch # RP30047 will fit and work well.
view full answer... - Fifth Wheel Towing Solution for 2016 Toyota Tundra with 5-1/2 foot BedThere really isn't a solution for towing a fifth wheel trailer with your 2016 Toyota Tundra with a 5-1/2 foot bed that allows you to keep the B and W gooseneck hitch. Normally we have to recommend a Sidewinder pin box for the needed clearance but you can't use Sidewinders with Companion hitches. The other solution you have is to replace the gooseneck with fifth wheel rails and use the only sliding fifth wheel hitch we offer that gives the needed clearance to make tight turns, the Demco...
view full answer... - Recommendations for Creating Smooth Ride Towing 5th Wheel Trailer with 2015 Tundra Short BedI definitely understand wanting to create as smooth a ride as possible for your daughter as she pulls a 5th wheel trailer, and we certainly have the components needed to make that happen. Since her 2015 Toyota Tundra features the short 5-1/2 foot bed, the best general setup is going to be with a fixed (non-sliding) 5th wheel hitch and a rotating pin box on the trailer, such as the Reese Sidewinder. A rotating pin box is needed to create enough cab clearance when she's making sharper turns...
view full answer...
Do you have a question about this Fifth Wheel Installation Kit?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Isabelle B
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Randy M.
3/24/2018
How’s it working out? It’s still out working! checked nuts after a couple trips, undercoated everything. No issues