Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches

See what our Experts say about this Reese Fifth Wheel Installation Kit

• Could Reese Fifth Wheel Rail Kit be Used with Pullrite Fifth Wheel Hitch
  There are some versions of the Pullrite Superglide hitches that are designed to fit industry standard rails which is what the bracket kit part # RP56016 is designed to work with. Which we have this as a kit with rails with part # RP56016-53 but if you have a hitch that is designed to fit the Pullrite rails we don't have a solution. Typically Pullrite puts "ISR" on their hitches that use industry standard rails like this as well as I know the 2700 is for this type of rail too.
  view full answer...
• Fifth Wheel Rail Mounting Bracket Compatibility with 2012 and 2015 Ford F-250 with 6-3/4 Foot Bed
  The Reese Quick-Install Custom Outboard Brackets # RP56016 will fit both the 2015 Ford F-250 and 2012 Ford F-250 with 6-3/4 foot beds. If you want the brackets and rails, then you will use the Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails # RP56016-53.
  view full answer...
• Determining if PullRite 5th Wheel Hitch Will Fit Reese Custom Base Rails for 2014 Ford F-250
  As you mentioned, the Reese Quick-Install Custom Base Rails and Outboard Installation Kit # RP56016-53 is indeed confirmed to fit your 2014 Ford F-250. This custom-fit kit will provide industry-standard, above-bed base rails in the bed of your truck. In order to determine if your existing PullRite 5th Wheel Hitch will fit these rails, you will need to know if it is compatible with industry-standard base rails. PullRite manufacturers a few different model hitches, some of which are compatible...
  view full answer...
• Outboard Reese Fifth Wheel Rail Kit Fit Confirmation for 2016 Ford F-350 Rail Location Dimension
  For your 2016 Ford F-350 short bed (or long bed) the Outboard Reese Rail Kit part # RP56016-53 that you have is listed as a fit. Since this is a custom fit, outboard kit it will be the easiest kit to install. The frame brackets being on the outside of the frame makes things much easier. The center of the jaws of the hitch will end up approximate 7/8 of an inch in front of the rear axle center. From the rear edge of the truck bed to the rear edge of the rear rail will measure 27-5/8 inches.
  view full answer...
  
• Which Base Rails For Reese Pro Series 15k In 2011 Ford F-250
  We've got just what you're looking for. For an above bed rail kit that will accept any 5th wheel hitch that installs into industry standard base rails you can use the Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # RP56016-53. This kit will allow you to install your Reese Pro Series 15k hitch on your 2011 Ford F-250 and comes with all of the hardware needed to install. I've linked an installation video of these rails on a similar F-250...
  view full answer...
• Does Reese Fifth Wheel Rail Kit part # RP56016-53 Fit 2014 Ford F-250 Short Bed
  For your 2014 Ford F-250 short bed without the factory rail kit the Reese rail kit part # RP56016-53 is a confirmed fit and would work well for you. It will work perfectly with your Reese 16k fifth wheel hitch as well.
  view full answer...
• Installing Reese Quick-Install Custom Base Rails on a 2012 Ford F250
  This can seem counterintuitive, but the 27 5/8 measurement for the install of the Reese rail and bracket kit # RP56016-53 applies to both 8 foot and 6 3/4 foot beds. Slider hitches will generally sit closer to the cab of the vehicle whilst in the towing position, keeping it almost centered over the axle. Long beds using fixed hitches will stay at that centered point. I have also included an install video of this system being installed on 2012 F-250 long bed for you to check out.
  view full answer...
• Will RBW X-16 Fit Industry Standard Above Bed Rails on 2012 Ford F-250
  The Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # RP56016-53 will give your 2012 Ford F-250 industry-standard rails, allowing you to use fifth-wheel hitches that mount 22” front to back and either 20-5/8” or 29” wide. From my research the RBW X-16 fifth wheel hitch will fit industry-standard rails but if you will want to take a quick measurement of the hitch legs from front to back as well as their width to verify this.
  view full answer...
• Does Reese Fifth Wheel Rail Kit part # RP56016-53 Come with All Needed Install Hardware
  The Reese Outboard Rail Kit part # RP56016-53 that you referenced comes with all hardware needed. That means all of the hardware that installs the brackets to your truck and all of the hardware that installs the rails to the brackets. I attached an install video for this rail kit for you to check out as well.
  view full answer...
• Easy to Install Fifth Wheel Rail Kit Recommendation for 2015 Ford F-350 Long Bed
  The easiest to install fifth wheel rail kit for your 2015 Ford F-350 will be a custom outboard install kit like the Reese kit part # RP56016-53. This is compatible with your Husky hitch as well. The custom install kits are much easier to install than universal kits as they minimize drilling. This kit is an outboard kit which means that the brackets are on the outsides of the frame which allows for an easier install.
  view full answer...
• Best Fifth Wheel Hitch for 2011 Ford F-250 with 6-3/4 Foot Bed
  With a 2011 Ford F-250 Super Duty with a short bed you are going to want a sliding hitch to give you clearance around tight turns. Which hitch you get is going to depend on the weight of your trailer. Both hitches use the same Quick-Install Custom Base Rails for your truck # RP56016-53. The custom base rails will make it a lot easier and faster to install with less drilling. You may also be interested in the trailer wiring kit for your truck # 41157.
  view full answer...
• Can Outboard Base Rails # RP30153 and Outboard Brackets # RP56016 be Used for Reese 16K Hitch
  The Reese Universal Outboard Base Rails # RP30153 will work with the Reese Quick-Install Custom Outboard Brackets # RP56016 but they are only designed to fit the following vehicles: 2011 - 2014 Ford F-250 and F-350 Super Duty 6-3/4 Foot Bed without Factory Rail Kit 2015 - 2016 Ford F-250 Super Duty 6-3/4 Foot Bed without Factory Rail Kit 2015 - 2016 Ford F-350 Super Duty 6-3/4 Foot Bed without Factory Rail Kit 2011 - 2014 Ford F-250 and F-350 Super Duty 8 Foot Bed without Factory Rail...
  view full answer...
• Fifth Wheel Hitch Recommendation and Rail Kit for 2013 Ford F-350
  Sounds like the previous owner removed the hitch and the base rails that you would see installed in the bed of the truck. If you did happen to still have the rails though and they are 22 inches apart on center (the standard rails design) then the Reese 16k hitch part # RP30047 would fit them and work well. Otherwise you would want a rail kit # RP56016-53 as well to give your truck bed a set of rails for the hitch to install into. This is a custom install kit that installs in half the time...
  view full answer...
• Fifth Wheel Installation Frame Brackets for 2013 Ford F250 SD
  The Reese Outboard Quick Install Brackets you referenced, part # RP50082 are a fit for 1999-2010 F250 models, but wouldn't be a fit for your 2013 model. For a 2013 model, for outboard brackets, you would need the # RP56016-53 bracket and rail kit. This kit includes the hardware to mount the brackets to the frame, the 48 inch long bed rails and all hardware.
  view full answer...
• Custom Rails And Brackets Compatible With 2015 Ford F-250
  The Reese Quick-Install Custom Base Rails and Outboard Installation Kit for 5th Wheel Trailer Hitches # RP56016-53 confirmed to fit your 2015 Ford F-250 uses the # RP30153 Reese Extended Length Fifth Wheel Installation Rails and the # RP56016 Reese Quick-Install Custom Outboard Brackets for 5th Wheel Trailer Hitches. The # RP50026 brackets not a fit for the outboard 48 inch rails, but are a fit for the 43 Inch rails # RP58058.
  view full answer...
• Are Firestone Air Bags Compatible With Reese Quick-Install Brackets and Rails on 2015 Ford F-350
  Yes, the Firestone # F2703 are compatible with the Reese Quick-Install Custom Outboard Installation Kit # RP56016-53. The # RP56016 brackets mount on the outboard side of the frame rails on your F-350, and the air bags will install on the inboard side. I also recommend adding an onboard air compressor like the Firestone Air Command II # F2219. This will allow you to control the air pressure wherever you go from the cab of your truck. It is a dual path system so you can control the air...
  view full answer...
• Fifth Wheel Rail Kit Recommendation for a 2016 Ford F-250 Short Bed
  Your Valley 7054 fifth wheel hitch will fit rails that we offer for your 2016 Ford F-250 as it is designed to fit industry standard rails like what you have. For a custom rail kit confirmed as a fit for your truck you would want the Reese part # RP56016-53 which would minimize drilling and install time. If you like your hitch and it's not worn out then keep it and use it till you want something better. If you want something that will be much nicer I would recommend the Demco Hijacker...
  view full answer...
• Fifth Wheel Rail Kit Recommendation for a 2016 Ford F-250/F-350
  For your 2016 Ford F-350 Super Duty long bed the Reese fifth wheel rail kit part # RP50026-58 is a confirmed fit that requires no drilling into the truck frame for installation. Or for an easier to install kit we have the outboard rail kit part # RP56016-53 that also does not require any frame drilling. Since it installs on the outside of the frame it will be noticeably easier to install as well as the other kit I mentioned uses brackets that install on the inboard side of the truck frame. These...
  view full answer...
• What are the Differences between Reese Fifth Wheel Rail Kits that Fit 2016 Ford F-250 Short Bed
  Reese offers two fifth wheel rail kits for your 2016 Ford F-250 short bed. They are different styles that have trade offs, but both of them are going to be much easier to install than a universal install kit. The part # RP56016-53 is an outboard rail kit. This means that the brackets for the rails mount on the outside of the truck frame. The benefit to this is that they are much easier to install. The drawbacks are that they cost more and the rails are dimensionally larger all around. The...
  view full answer...
• What is the Difference Between Reese Custom 5th Wheel Brackets # RP56016-53 and # RP50026-58
  These brackets are very similar and have very close instructions when it comes to install as well. There is about a 5 inch difference in the location of where these brackets are installed and then when you get towards the end of the instructions there are a few difference like the torque specifications. Other than the size of the base rails, there really are no big differences.
  view full answer...
• Comparison Of Fifth Wheel Custom Installation Kits For 2016 Ford F-150
  The difference between the Custom Base Rails and Installation Kit, part # RP50026-58, and part # RP56016-53 is the length of the base rails. The baserails for part # RP50026-58 are 43 inches long and for part # RP56016-53 the length is 48-inches. Both installation kits are designed to mount to the outboard side of the truck frame.
  view full answer...
• How Can I Convert my Fifth Wheel Hitch Rails to Haul a Gooseneck Trailer
  If I understand correctly you have something similar to the Reese 5th Wheel Trailer Hitch w/ Square Tube Slider part # RP30051 and the Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches part # RP56016-53 currently installed in your 2016 Ford F-250 Super Duty. You now want to use that to haul a gooseneck trailer which can happen easily by using the Curt Gooseneck Plate for Fifth Wheel Rails part # 16055. This is designed to fit right into the...
  view full answer...
• Fifth Wheel Trailer Hitch Recommendation for a 2012 Ford F-250 and 2012 Heartland Elkridge Trailer
  For your new 2012 Ford F-250 and Heartland 5th wheel trailer, I recommend going with a 16K Reese hitch which will give you plenty of room to spare as far as capacity and will provide you with years of service. To me a standard bed is an 8 foot bed. That would mean you would need the fixed version, # RP30047. But if your bed is 6-3/4 feet long, you would need a slider. The slider that offers the most travel and most clearance for making tight turns is the round tube slider found with the...
  view full answer...
• Which Reese 5th Wheel Hitch Do You Recommend For My 2015 Ford F-250 SuperDuty?
  I'm including a best 5th Wheel Hitch video Rob made for the 2015 Ford F250 SuperDuty. He recommends getting the Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # RP56016-53 because it is an industry standard rail so any industry standard fifth wheel like the Reese 5th Wheel Trailer Hitch # RP30051 you were looking at. I suggest getting this system. I suggest getting the Reese 5th Wheel You were looking at # RP30051 but with this installation...
  view full answer...

Do you have a question about this Fifth Wheel Installation Kit?