MaxxFan Deluxe Roof Vent Installation - 2021 Sunset Park Sunray Travel Trailer Video

Good morning, Don. The 3/4" wide butyl tape is exactly what we recommend for installing a roof vent such as the MaxxFan #MA00-07000K. We actually sell a roof vent install kit part #344270KITW that comes with sealant, screws and a 30'…

The Dexter 31549 axle on your snowmobile trailer is a 3,500 lb torsion axle. Although we do not carry torsion axles, you can use the Timbren Axle-Less Trailer Suspension #ASR3500S05. This is very similar to your current axle with each side working…

Both the MORryde Rubber Equalizers #MR87ZR and Dexter E-Z Flex Suspension Kit #K71-652-00 are achieving the same result. They are doing so with slightly different designs but end up with the same result. I recommend using the Dexter E-Z Flex…

For an enclosed cargo trailer the Rack Em Ladder Rack part #RA-28 would be a great option. It has a 400 lb capacity and can telescope to fit roofs that are between 4 feet and 8-1/2 feet wide.

Between the Shocker Hitch and Gen-Y Torsion ball mount, I recommend the Gen-Y. Its rubber torsion arms are going to absorb road shock naturally due to its design, while the Shocker Hitch requires constant maintenance that isn't needed with the…

Yes, the MaxxAir Deluxe Roof Vent #MA00-05100K that you referenced can be installed on a sloped roof (as long as it's still a straight incline/decline and not domed shape roof). This is really the case with any of the roof mounted vents we have…

The thermostat range for the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-07000K is 29 degrees Fahrenheit - 99 degrees Fahrenheit or -2 degree Celsius - 37 degrees Celsius.

That's a really good question; I reached out to Furrion, and what they told me was that yes, you can use one monitor with the Furrion Vision S Wireless RV Backup Camera #FCN48TASF on two different trailers. However, they said it "would be a…

I recommend using the RV Propane Gas Detector - 12 Volt - 2 Wire - Black #RS44FR and using the larger 7-1/4" long x 3-3/8" wide bracket for the installation as that should be a little larger than your current model 7770.2 gas detector.

I reached out to Lippert to confirm that the Trailair Flex Air 5th Wheel Pin Box, #LC328492, is not compatible with the Lippert 1116 pin box. The Flex Air system is only compatible with the 1621 Pin Box. The Trailair Air Ride 5th Wheel Pin Box -…

If you do have the 1116 pin box then the Trailair Air Ride pin box that fits your 2018 Montana Country 331RL is the part #LC155943 which has a 21,000 lb weight capacity. You can confirm that your pin box is a 1116 by looking at the stickers or plates…

I spoke with LaSalle Bristol and they informed me that the LaSalle Bristol XTRM Universal Self-Leveling Sealant part #34427034145-1 has a dry time of around 1 hour.