MaxxFan Deluxe Roof Vent with 12V Fan Installation Video

Hey Dave, yes the High Pointe Convection Microwave our part number #HP99ZR is the exact same as the part number you are looking for so this would be exactly what you are looking for as a replacement.

The MaxxAir MaxxFan #MA00-06401K that you asked about has a maximum draw of 4-1/4 amps when it is set at it's highest setting. Since this is a 4 speed fan it will decrease about 25 percent for each setting that is one step lower. This means…

The Dexter 31549 axle on your snowmobile trailer is a 3,500 lb torsion axle. Although we do not carry torsion axles, you can use the Timbren Axle-Less Trailer Suspension #ASR3500S05. This is very similar to your current axle with each side working…

The MaxxFan Deluxe Roof Vent w/12V Fan measures only 5" tall when closed. Attached is a diagram of this measurement as well as an installation video for you to check out as well.

I reached out to my tech contact at MaxxFan and confirmed the MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke #MA00-06401K can be left open while traveling at highway speeds. You won't need to have the cover like the more…

There will be no problem at all, and if you'd like to use a 12 volt lithium battery that will absolutely work with the MaxxFan roof vent you asked about: - MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke #MA00-06401K

Changing the polarity of the MaxxFan Deluxe Roof Vent w/ 12V Fan #MA00-06401K would likely burn out the circuit board. The #MA00-06401K is designed to move air out of your trailer when the vent cover is open or pull air in and circulate the air…

The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-05100K, as well as all of their other models does have a start up surge when first activated. The product page for the #MA00-05100K just didn't have it listed like the #MA00-06200K…

Yes, we have the part #MA00-05301K which is the version of the part #MA00-06401K that has a white lid.

What you need to do is measure the size of the opening on your trailer's roof, which you can do be removing the vent as well as the garnish around the vent. If you did this and only got 13-3/8" x 13-3/8" I highly recommend simply…

Not to worry! You can absolutely install your MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift #MA00-06401K in the other direction, it will not affect the operation of the fan. You will just want to make sure that your fan stays closed while…

You'd want to use the non-sag sealant part #344270341437-1 on vertical applications where you wouldn't want the sealant to drip or run. The #34427034145-1 is better for horizontal applications as it's self-leveling, but it would run or…