7 Steps to Clean Your RV Awning, Prevent Mold, and Save Money

You're at the campsite, ready to relax. You pull out your awning overhead, and you suddenly see it: the unmistakable patch of mold creeping along the edge of the fabric. And that's when you remember that it rained last time you were out, and you committed that cardinal sin in the world of awnings: you rolled it up wet.

Fortunately, this is not a death sentence for your awning. Although RV awning fabric is typically made to resist mold and mildew, any fabric left in the elements for an extended period of time is going to need some TLC. Even if your awning is not currently moldy, it's a good idea to clean it regularly so that you can prolong its functional life and enjoy it for years to come.

Shop all RV awnings or read on below.

Learn more about maintaining your RV awning:

How to Clean Your RV Awning: Step by Step (with pictures)
How Often Should You Clean Your RV Awning?
Cleaning Vinyl vs. Acrylic Fabric

How to Clean Your RV Awning: Step by Step (with pictures)

Watch a quick video demonstration on cleaning an RV awning, or go step by step through our guide below.

NOTE: Always check your owner's manual for instructions on caring for your specific awning. Manufacturers' recommendations can differ between brands and models.

Step 1

Open your awning and lower it as much as possible. If it's too high for you to reach, you may need a step stool or a long brush.

Step 2

Prepare your cleaning solution.

Store-Bought Solutions

You can use a store-bought solution like Valterra's RV Awning Cleaner # V88542, which is designed to remove dirt, mold, mildew, and tree sap from your awning, as well as condition the fabric. If you use a store-bought cleaner, be sure that it is designed specifically for awning fabrics. Avoid solutions that are oil-based, caustic, or abrasive.

DIY Solutions

You can also create a homemade cleaning solution. Dish soap (Dawn being ever-popular among RVers) and water form a great DIY cleaner.

Bleach is also commonly used in DIY cleaning solutions. However, you should check your awning owner's manual before proceeding with this method. Some manufacturers recommend using the bleach and water method, while others highly discourage it.

Tree Sap Solutions

Tree sap can be a particularly stubborn substance to remove from your awning, especially if you have a woven acrylic fabric. If a regular cleaning solution isn't working, some other common methods recommended by RVers include:

Isopropyl alcohol (Most recommended)
Turpentine
Clorox Clean-Up spray
Peanut butter
Formula 409

NOTE: With any cleaning solution, always try it on a test location on your awning first to make sure the solution won't discolor your fabric or leave residue behind. If you use bleach or another toxic chemical, avoid washing the awning over grass or plants that might be affected by the runoff.

Step 3

Prepare the awning by clearing away any leaves or debris, then rinse both sides of the fabric with a hose to remove any loose dirt.

Step 4

Cover your RV awning with your cleaning solution. You can use a spray bottle, a brush, or a pressure washer (just be sure not to tear the fabric!). Make sure to cover the top and bottom of the awning. Then, roll up the awning so that the solution can soak. Let it sit for 5 minutes.

Step 5

Expand the awning again and gently wipe the fabric with your rag, brush, or sponge. A car wash brush with a long handle is often helpful for reaching difficult spots.

For acrylic awnings, use a stiff brush. For vinyl awnings, use a soft brush. For stubborn small stains, mold spots, or tree sap, try a toothbrush.

NOTE: Wipe, don't scrub. Hard scrubbing, especially on acrylic awnings, will remove the protective layer.

Step 6

Rinse the awning thoroughly with your hose or pressure washer. Make sure all traces of your cleaning solution are removed, especially if you used a chemical such as bleach. Leaving behind traces of bleach or other such chemicals will damage your fabric.

Step 7

Allow the awning to air-dry completely (be patient; never apply heat to dry the fabric) before storing.

If desired, once the awning is dry, you can treat the fabric with a protectant such as 303® Aerospace (for vinyl awnings, to repel dirt and provide UV protection) or 303® Fabric Guard (for acrylic awnings, to restore water repellency).

How Often Should You Clean Your RV Awning?

At minimum you should clean your RV awning once a year prior to storing your motorhome for the winter. (Read more about preparing your motorhome for winter storage here.) It's also time to clean your awning if it appears dirty, if you park beneath trees and sap drips onto the fabric, or, of course, if it's sporting mold or mildew. In general, it's a good idea to clean your awning every few months, or more often if you use your RV frequently.

Essentially, if you're wondering whether or not it's time to clean your awning, it probably is.

Cleaning Vinyl vs. Acrylic Awning Fabric

RV awning fabric is typically either vinyl or acrylic. Each provides different benefits and requires a slightly different approach to maintenance.

Acrylic

Acrylic is a breathable woven fabric that presents unique challenges when it comes to cleaning. Because it is a woven fabric, dirt and tree sap can sink deeply into the weave. Acrylic awnings also come with a water-repelling finish. It's important not to scrub too hard when you clean the fabric, as you can actually scrub off the finish.

How to clean: Use a stiff brush, dish soap, and water. Avoid scrubbing, which can remove the water-repelling finish and ruin your awning. If you use a protectant spray, make sure to use a product designed to restore water repellancy that will not damage the fabric or finish.

Vinyl

Vinyl material is somewhat easier to clean. It doesn't share the porous surface of acrylic fabric, so you don't have to worry so much about tree sap and dirt settling in to stay.

Vinyl awnings resist mildew, but they are not mildew-proof. You may have heard that vinyl awnings don't technically grow mildew; rather, they collect dirt and dust on which mildew forms. But for an RVer, the presence of mildew is a problem regardless of whether it formed on the vinyl itself or the dirt covering the vinyl.

How to clean: Use a soft brush, dish soap, and water. Avoid scrubbing, which can remove the mildew-resistant coating. If you use a protectant spray, make sure to use a product designed to provide UV and dust/dirt protection that is safe to use on vinyl.

Recommended Supplies List

Dawn dish soap, Valterra # V88542, or other awning cleaner
Brush or cloth
Hose
Ladder or stool (optional)
Awning protectant (optional)

Related Products

Shop Brushes

Shop Awning Repair Tape

Shop Awning Screens

Written by: Amber S.

Updated on: 12/14/18

Steve J.

2/15/2023

I use dawn and water mix and I use bleach for the bad spots. Never had a problem.

Mike L.

2/16/2023

Sounds like a good plan, as long as the awning manufacturer says using bleach is okay, the bleach is properly diluted and the awning is thoroughly rinsed afterward.

Al S.

1/2/2021

Have a lippert vinyl awning, can you use an automotive vinyl top sealer on your awning? Everyone makes a cleaner, have not yet seen a vinyl sealer for rv awnings.

Jon G.

1/7/2021

I honestly haven't looked into this before and so I reached out to my contact at Lippert who did a little digging and then replied that they don't recommend modifying an awning, but that's really because she couldn't find anything on the matter. It makes sense to me and from the limited amount of research I did it looks to be a viable option. I would do a little more research on your end and or wait and see if someone replies to this who has done it before. When/if you go to do it I do recommend testing it out first on a small part of your awning that won't be too visible so you know how it will interact with the awning just to be safe.

Jack V.

7/12/2020

I have some stains that will not come out is there anything else I can do other than replace like paint it stains are on the white underneath side

Mitch

6/23/2020

Didn’t work for me. Found that a mr clean eraser, or a nice eraser worked fantastic. Got a little wet and took about 45 minutes but what a difference. That is my recommendation.

Chris R.

6/26/2020

Awesome. Thanks for your advice!

Explore Expert Info

on RV Awnings

Videos

for RV Awnings

Help Articles

for RV Awnings

Expert Answers

for RV Awnings

Lippert Solid Stance RV Step Support Kit Review

MORryde Standard Frame Hanger X-Factor Crossmember Review

Lippert Components RV and Camper Steps - Motorhome - LC432687 Review

Review of Lippert RV and Camper Steps - Step Stabilizer Kit - LC96BJ

Review of Empire Faucets RV Faucets - Stainless Steel RV Kitchen Faucet With Goosneck Spout - EM54JR

Empire Faucets RV Single Lever Handle Kitchen Faucet Installation

B and W Hitch Receiver Reducer Sleeve Review

Review of Dexter Axle Trailer Hubs and Drums - Nev-R-Lube Hub with Integrated Drum - 8-388-80UC3

Review of MORryde X-Factor Crossmember For Standard Frame Hangers - MR33WR

Alpha Systems RV Butyl Tape Review

Review of Alpha Systems RV Roof Repair - 1-1/2 Mylar-Backed ButylTape - AL93FJ

Mount-n-Lock RV Bumper Reinforcement SafetyStruts Review

30-Amp and 50-Amp RV Service: What&amp;#39;s the Difference?

30-Amp and 50-Amp RV Service: What&#39;s the Difference?

Cleaning Your RV Black Water Tank in 4 Easy Steps

How to Store a Travel Trailer/Camper for the Winter

Beginner&amp;#39;s Guide to RV Awnings: How to Open, Close, and Maintain Your Awning

Beginner&#39;s Guide to RV Awnings: How to Open, Close, and Maintain Your Awning

How Does an RV Toilet Work?

How to Troubleshoot Your RV Air Conditioner

How to Service An RV Air Conditioner

How Much Solar Power Do I Need For My RV?

Cleaning Your RV Gray Water Tank in 5 Easy Steps

Replacing RV Awning Fabric: Your Step-by-Step DIY Guide

Snow Tire Chain Overview: How to Buy the Right Tire Chains

RV Propane 101: How Does My RV&#39;s Propane System Work?

RV Propane 101: How Does My RV's Propane System Work?

Where Do the MORryde X-Factor Crossmembers Install

The MORryde X-Factor Crossmember part #MR33WR attaches to the leaf spring hangers which are located in-between and in the front and rear of each axle. I have attached a photo below to clarify. Therefore, you&#39;ll need three for full support…

view full answer...

Is It Normal For One Shackle To Point Up and The Other Point Down After Replacing Equalizers?

The shackles on your equalizers should be pointing up when the trailer is under its weight on the ground, and will only point down like you mentioned when the trailer is in the air and the axles are off the ground. It is pretty common for one side…

view full answer...

Will The Empire Faucets RV Kitchen Faucet #EM54JR Fit A 1-1/2&quot; Inlet Hole

Yes, the Empire Faucets RV Kitchen Faucet #EM54JR has a 1-1/4&quot; inlet shank so you&#39;ll have plenty of space to get to fit. The spout can be turned so you will be able to have the handle on the left side as well.…

view full answer...

Replacement Exterior Shower Parts for 2013 Arctic Fox 811 Truck Bed Camper

I checked the Northwood website for any detail on the exterior shower unit installed on their 2013 model 811 truck bed camper but none is provided. I also contacted their parts department for any help they could provide in identifying the brand and…

view full answer...

How To Install The Replacement Ball and Plate Assembly for Curt Friction Sway Control System

The Replacement Ball and Plate Assembly for Curt Friction Sway Control System part #C17201 is the replacement ball and plate for the Curt Friction Sway Control for Weight Distribution Systems part #17200. The plate assembly needs to be 24"…

view full answer...

Replacement Roof Vent Cover for 2000 Jayco Quest

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover,…

view full answer...

What Side of Trailer Frame Does Mount-n-Lock SafetyStruts Install

Normally the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets #MO34VR install on outsides of trailer frame. I attached an install video for this for you to check out as well.

view full answer...

How To Select The Right Awning Size For Slideout

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

How To Correctly Measure Awning Arm Length for Replacement

The awning arms are measured from top to bottom of the wall mount. This can then be used to select the correct length replacement. I have attached a photo below to assist. You will also need to pay attention to the style of arms such as pitched or…

view full answer...

Can I Get a Slide Out Topper If I Don't Have the Proper Clearance Past the Slide Out Flanges

With the lack of clearance your options are more limited but you can still get a slide topper for your slide out. You will just have to realize you may not have full coverage of the slide out. You can down size to a smaller slide out topper that…

view full answer...

How to Pick Out Awning Fabric for Awning on RV

To pick out the correct awning fabric size you need to measure center of arm to center of arm on your awning and order that size. For example, the Replacement Awning Fabric for 10' Roller Assemblies #LCV000334335 is for 10' roller…

view full answer...

Clearance Needed to Install Solera Slide Out Awning LCV000184673

Thank you for the photo, and I can tell you that the Solera RV Slide-Out Awning - 11'1" Wide #LCV000184673 does require at least 7 inches of clearance in order to install. Unfortunately, there is just no way to shorten the awning, so…

view full answer...