Draw-Tite Ball Mount Review - 2014 Chevrolet Tahoe Video

Customers compare 2923 to these similar products

Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K

(681)

$93.18

Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs

(1225)

$78.81

Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs

(3827)

$56.49

TowSmart Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 6,000 lbs

(6)

$21.23

Curt Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8,000 lbs - Aluminum

(89)

$46.94

etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs

(1314)

$98.44

Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs

(2461)

$33.16

Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs

(3827)

$32.29

Draw-Tite Ball Mount - 3/4" Rise, 2" Drop - 10-1/2" Long - 6,000 lbs

(2461)

$22.32

Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs

(228)

$91.73

B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 10-1/4" Long - 16,000 lbs

(123)

$60.00

Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs

(3827)

$38.36

Curt Hollow Shank 2-Ball Mount for 2" Hitches - 2" and 2-5/16" Balls - 10K - Chrome

(25)

$52.46

Fulton Aluminum Ball Mount for 2" Hitches - 2" Drop, 1" Rise - 8,000 lbs

(22)

$88.78

Brophy Ball Mount - 1" Rise, 2" Drop - 9-3/4" Long - Aluminum - 8,000 lbs

(132)

$78.50

Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs

(3827)

$33.63

Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs

(149)

$40.90

B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 8-1/2" Long - 16,000 lbs

(123)

$55.00

etrailer Ball Mount Kit for 2" Hitches - 3/4" Rise or 2" Drop - 7,500 lbs

(1314)

$59.70

Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 12" Long - 12,000 lbs

(36)

$67.40

Products Featured in this Video

Review of the Draw-Tite Ball Mount on a 2014 Chevrolet Tahoe

Today on our 2014 Chevy Tahoe, we'll be doing a quick test fit of the Draw-Tite ball mount, part number 2923. Before we begin our test fit, we'll first need to get the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height is about 24 and a quarter inches. Keep in mind this measurement may vary due to tire size,… see more >

Info for this part was:

Test Fit:

Joe V

Test Fit:

Patrick B

Test Fit:

Rick A

Test Fit:

Matthew K

Test Fit:

Cole B

Test Fit:

Randy B

Video by:

Andrew K

Video by:

Patrick B

Video by:

Adam E

Installed by:

Jeff D

Installed by:

Chris R

Video Edited:

Jacob T

Video Edited:

Kathleen M

Video Edited:

Sue W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Explore Expert Info

Most Popular

Videos

Help Articles

Expert Answers

Trailer Brake Controller Installation - 2011 Chevrolet Tahoe

Curt Trailer Hitch Installation - 2012 Chevrolet Tahoe

Trailer Connector Socket Installation - 2012 Chevrolet Tahoe

Front Mount Trailer Hitch Installation - 2003 Chevrolet Tahoe - Curt

Yakima Rack and Roll Trailer Assembly

Yakima Rack and Roll Trailer Review

Rhino Rack Roof Rack Installation - 2019 Chevrolet Suburban

Review of Curt Hitch Accessories - Hitch Lock - C23025

Fastway Flash 2-Ball Mount with Built-In Scale Review

Trailer Connector Socket Installation - 2001 Chevrolet Tahoe

Edge Gas Evolution CTS3 Performance Tuner Review

Choosing the Right Trailer Wiring

Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV

How to Choose the Right Trailer Hitch Class

Ball Mount Basics: Weight Capacity, Class, and Size

The 5 Best Trailer Drop Hitches You Can Buy

How to Measure for Trailer Hitch Drop

Hitch Adapters and Extenders

Frequently Asked Questions About Transmission Coolers

Trailer Hitch and Trailer Wiring Harness Recommended for 2013 Chevy Tahoe Police Package Vehicle

The Curt Class III hitch, part #C13161 is indeed a fit for a 2013 Chevy Tahoe PPV (Police Package Vehicle). You can see it being installed on a 2012 St. Charles County Police PPV Tahoe by clicking the provided link. The tow package harness is already…

view full answer...

Torque Specs for the Yakima Rack and Roll Trailers

I checked the install instructions for the Yakima Rack and Roll Trailer part #Y08107 that you referenced and found the following torque figures: Wheel axle nuts (2) – torque to 57 ft. lbs. (77N-m) (a force of 57 lbs. on a 1 ft. lever.) Swingarm nuts…

view full answer...

Could Yakima EasyRider Double Decker Trailer Carry Kayaks and Bikes

The Yakima EasyRider Double Decker Trailer #Y08129 has a 500 lb capacity and HD load bars that are 78 inches long so it would easily carry the weight of your 80 lb boat, kayaks, and mountain bikes. One great feature is that you could put the boat on…

view full answer...

To secure your Hobie Mirage Pro Angler 14 with 360 Drive Technology to the lower level of the Yakima EasyRider Double Decker Trailer #Y08129 I recommend the Yakima BigCatch Kayak Carrier #Y04091. The BigCatch is confirmed to fit the lower round bars,…

view full answer...

Height from Bottom of Coupler Lip of Yakima Rack and Roll Trailer to Ground When Trailer is Level

For the Yakima Rack and Roll Trailer part #Y08107 the height from the ground to the top of the inside of the coupler where the ball sits is 22 inches so then from the bottom of the coupler lip to the ground measures 20 inches when the trailer sits…

view full answer...

What is the Height of the Yakima EasyRider Double Decker Trailer

The height of the Yakima EasyRider Double Decker Trailer #Y08129 is 41-1/4" which would also be the depth if it was stored vertically. After reaching out to Yakima, I found that this trailer cannot be stored vertically. You would have to store…

view full answer...

Coupler Height of Yakima EasyRider Double Decker Trailer

From the ground to the bottom of the coupler for the Yakima EasyRider Double Decker Trailer #Y08129 it measures 16". To ensure that you tow the trailer level you just need to measure from the ground to the top of the inside of the receiver on…

view full answer...

Can a Dual Hitch Adapter and Hitch Extender Be Used Together For Towing with a Bike Rack

I do have an option for you but you cannot use multiple hitch adapters together like the dual hitch adapter part #D-192 and the hitch extender part #C45791 for example. This would create too weak of a connection point and would limit your towing…

view full answer...