Rhino Rack Roof Rack Installation - 2019 Chevrolet Suburban Video

To mount the Go Power solar panel like #34282182 to the Rhino-Rack crossbars you would need to adjust the crossbars to the correct width for your panel. Then you can use the Truck Rack T-Slot Fit Kit for Malone Kayak Carriers #MPG8287 or Crossbar…

The Yakima LockNLoad Platform Rack for Crossbars part #Y05044-39 and Rhino-Rack Universal Pioneer Platform Rack for Crossbars part #RR42115BF are both great options for a 2016 Honda Pilot. They each come with crossbar clamps and will work great with…

I have a solution for you, but the Rhino Rack Pioneer Platform #RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of…

In order to mount the Rhino-Rack Pioneer Platform Roof Tray part #RR35TB to Rhino-Rack Heavy-Duty Roof Rack Crossbars you need the Pioneer Platform Mounting Kit for Rhino-Rack Heavy-Duty Crossbars part #RR43105. This adapter attaches to the channels…

I wish there was, but we don't carry Whispbar anymore and when we did there wasn't a way to adjust the height of the bars. The only solution we'd have would be a ladder rack that fits your 2014 Toyota Tacoma that has adjustable height…

That is completely normal. Thule states that the Cantilever Extension #TH24002XT will sit about 1.5" to 2" higher than the bed racks. Once the rack system is properly loaded, it will level out with the height of the bed racks. If you are…

We currently don't have any photos of the Rhino-Rack Backbone Mounting System for Pioneer Platform - Suburban, Yukon, or Escalade #RRRCSB1 installed, but I do know that this system attaches to the factory raised side rails of your Suburban and…

Yes, the Rhino Rack SX series legs part #RRSX022 do fit the Rhino Rack Pioneer Platform tray part #RR45TB.

The shark fin antenna on a 2017 Honda CR-V does not appear to be an issue from what I can see. It looks like the antenna is on the back downward sloping portion for the roof and the roof rack installs on the upward sloping part of the roof and then…

The channel on the Rhino Rack Roof Track, part #RRRTV148 is 0.86 inches (a little less than 7/8 inches) by 0.19 inches (a little less than 3/16ths inch). I've included a diagram showing these dimensions. The upper channel is about 5/8 inches…

The square blocks included with Rhino-Rack track adapter kit #RRT-FK3 are 0.71 inches long, 0.51 inches wide, and 0.12 inches thick.

Here are the 2 different mounting options for installing the Batwing and Foxwing Awning Relocation Kit #RR31102. You can change the orientation of the brackets so that the awning will either hang higher or lower depending on your application.