Yakima Rack and Roll Trailer Assembly Video

You'd only need to adjust the Heavy Duty Shocks for Yakima Rack and Roll Trailer #Y08110 if you're hauling a heavy load that is causing your shocks to bottom out. These shocks have 4" vertical adjustability to combat that, so…

Yes, for the B&W Tow & Stow, I recommend the Trailer Hitch Receiver Lock for 2", 2-1/2", and 3" Hitches #C23025.

The Yakima Rack and Roll Trailer #Y08107 referenced in your question can be easily folded for storage in numerous positions, however the wheels themselves cannot fold flat. The wheels though can be easily removed along with folding the trailer to…

You are absolutely right that for your 16-1/2 foot canoe the best option is a trailer because this is going to make it much, much simpler for you to haul your canoe; you'll be able to spend a lot more time in the water and a lot less time…

The Yakima Rack and Roll trailer part #Y08106 doesn't have any safe jacking points on it so if you were in need of changing the spare you'd have to remove the kayak and raise the trailer by hand.

I checked with Yakima to verify and the Rack and Roll Trailers like the part #Y08106 that you referenced comes with a coupler now that is designed for 2 inch hitch balls. At one point it was 1-7/8 inches be they have since changed that. The info you…

I checked with Yakima and they told me to have to have you clean and lubricate the bushing and then try to pull it off with a pair of pliers. Force isn’t an issue because if they can’t get the bushing off we will need to replace the trailer side…

I went out to the warehouse and pulled Yakima shock for Rack and Roll trailers #Y08110 to measure it. From the center of one eye to the center of the other is approximately 12-7/8 inches.

Since you are going to need to use a ball mount with a larger rise of 8-10 inches that will also need to be longer to clear the rear bumper you are going to want a Class III hitch for your 2015 Honda Odyssey like the part #C13068 which is also a…

I reached out to my contact at Yakima and she said that the compressed length of the Replacement Standard Shocks #8880177 is 9.45 inches. These are designed to replace the standard shocks on the Yakima Rack and Roll Trailer #Y08106 and #Y08107.

I love the Yakima Rack and Roll, part #Y08107, but the trailer isn't designed for in-water use, as none of the electrical components are waterproof or water resistant. I do, however, have an alternate solution. The Rack and Roll is aluminum…

Your best bet is to add the Tongue Extension Kit for Yakima Rack and Roll Trailer #Y08109 to your Rack N' Roll trailer which will increase the capacity from one 17' long or two 16'-long boats to one 22'-long boat or two 21'-long…