Curt Custom Fifth Wheel Kit Installation - 2008 Ford F-250 Video

To use your Pro Series 15k fifth wheel hitch in the bed of your 2006 Ford F-350 what you will need is a rail kit that was designed for your new truck like the Curt #C16448-204. This provides the exact set of rails your Pro Series hitch needs.

The Reese Slider hitches in the tow position would have the same king pin orientation as the stationary hitches. If you were to install the #RP30048 on your Reese 15k hitch head you wouldn't lose any cab clearance while in the tow position.

The reason you are having trouble finding anything with those dimensions is that they don't make them that large. The largest carrier with ramp we carry is the 30x50 Flint Hill Goods #FHG77ZR. The larger issue you will find is that there is not a…

The Pollak part #PK11893-11932 would install in line with the 7-way portion of the trailer wiring you have at the rear of your 2015 Chevy Silverado 3500. If there is only one round connector at the back of the entire harness it would plug in line…

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

The rails that came with your (discontinued) Pro Series 5th Wheel Hitch w/ Square Tube Slider, Rails and Installation Kit PS30133 would have been what we find in the Reese Universal Base Rails and Installation Kit #RP30035. This means that if you…

It looks like you are referring to step 7-d of the installation instructions for the 5th wheel trailer hitch installation kit #RP50140-58, linked for reference. Step 7 refers to installing the rear frame brackets under the truck. The holes drilled…

I suppose you could but the positioning of the rails is critical so you would need to be vigilant about getting them in the right locations. I recommend just following the installation instructions because if you were to have the brackets off of…

Do you need the instructions for the 5th wheel hitch, installation kit, or both? I have linked instructions for the Reese 16K fixed version and the square tube slider base for you. For the install kit I would need to know which kit you have. I have…

Since your RBW Xtender hitch is designed to fit industry-standard 5th wheel base rails you can use installation kit #RP30035 from Reese that works with 5th wheel hitches from many manufacturers like RBW. This kit requires some drilling for…

I recommend getting a new custom fit installation kit for your 5th wheel trailer hitch in your 2008 Ford F-350. Using a new kit will ensure the capability of all the parts and you will also get new hardware for installation. For your truck, one…

Yes, the Curt fifth wheel rail kit part #C16443-204 that you referenced will work with your Husky 16k fifth wheel hitch. The rails of this kit are industry standard rails which is what your Husky hitch is designed to work with.