etrailer Trailer Brake Controller 7-Way RV Upgrade Kit Installation - 2018 Subaru Outback Wagon Video

We sure do! The etrailer Electric Trailer Brakes item #AKEBRK-35 work with 3,500 lbs axles that have a 4 bolt mounting flange. These left and right 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates that work with 15"…

We do have everything you need to install a 7-Way on your 2020 Subaru Outback Wagon so you can utilize a brake controller but we need to start off by making sure you have a 4-Way for the basic trailer lighting functions. If you don't already have…

Since you already have a 4-way connector on your 2018 Toyota Highlander you need to use one of our adapter kits to convert it to a 7-way. If the trailer doesn't have brakes you only need to power its lights and the battery so you can use part…

Since the Torflex number 9 axle is a 2,000 lb capacity axle and I was able to determine that your Little Guy Meerkat Trailer has wheels that have a 5 on 4-1/2 inch bolt pattern the correct hub/drums you'd need to add brakes would be the Dexter…

You can absolutely get a 7-way connection at the back of your 2022 Subaru Outback Wagon. The reason you are only seeing 4-way adapters is because your Outback Wagon does not have factory wiring. So essentially you will need to install a 4-way flat…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

To use the Curt Echo Wireless Trailer Brake Controller #C51180 your vehicle only needs 12 volt, ground, and turn signals connected to its 7-way socket. What this means is you do not need the brake signal from the 7-way. For example, if you used a…

The Curt Echo Brake Controller part #C51180 is a great choice because of its convenient and simple installation. The 7-way connector that you mention part # A10-7084VP pugs into the 4-way connector you purchased part #C56217. The white wire from the…

Both of these are reliable brake controllers. Personally I like the freedom that the Curt Echo #C51180 gives you. You can use it on any vehicle with a properly wired 7-way and trailers with up to 2 braking axles. There is no wiring and it can be…

You have just about everything you need. You'll need to extend the black wire on that #37185 using a length of #10-1-1 10 gauge wire and run it to the positive battery terminal via a 40 amp breaker like #9510. I'll link to a video that…

The wires should match blue to blue and black to orange. I have included a link to a brake controller install page on 1997-2004 Ford trucks and vans that should be pretty helpful. You can snip the wires and splice instead of using a Scotch-Lock type…