Recommended Replacement Brakes for a 2007 Pace Trailer w/ 15 Inch Rims
Question:
Im looking for a trailer brake kit for a 2007 Pace trailer 15 rims. Single axle. 10 x 6 Do you have any options?
asked by: Brian C
Expert Reply:
We sure do! The etrailer Electric Trailer Brakes item # AKEBRK-35 work with 3,500 lbs axles that have a 4 bolt mounting flange. These left and right 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates that work with 15" wheels.
For hubs, I would need to know what size bearings you currently have and also your trailers lug pattern so you don't have to change your wheels.
There are two ways to identify the bearings your spindle uses. Wheel bearings are stamped with the part number so the easiest way to determine the correct bearings is to pull them off of your spindle and read the numbers on them.
The other way is to measure your spindle where the bearing sits with a set of digital calipers like item # PTW80157 since you will an exact measurement. The attached diagram will show you how to properly measure your spindle.
Please feel free to email me directly or leave a comment below with the part numbers or dimensions you find and I will be happy to recommend a replacement set of hubs for you.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Brake Controller
- Shop: Trailer Wiring
- Shop: Curt Universal Installation Kit for Trailer Brake Controller - 7-Way RV - 10 Gauge
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt Mounting Bracket for 7-Way Connector Plug
- Video: Best 2018 Ford Explorer Trailer Wiring Options
- Video: etrailer Trailer Brake Controller 7-Way RV Upgrade Kit Installation - 2018 Subaru Outback Wagon
- Search Results: brake controller
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Brake Controller
- Search Results: trailer brake controller
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: etbc7
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Search Results: trailer hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller Installation: Starting from Scratch
- Search Results: hitch
- Shop: Gooseneck Hitch
Brian C.
4/1/2024
Please recommend a matching Brake Drums and electronic controller for a 2018 Ford Explorer