Review of etrailer by AxleTek Trailer Axles - 3500 LB 89 Inch Long Trailer Axle - e65GR Video

Thank you for all of the information! For your application I recommend checking out the 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e57SR. This measures 25-1/4" from center eye to center eye but that will likely match up with what you…

I think your idea is right on the money. Take the information from the 25-1/4 inch spring hanger spacing and subtract 2 inches. The subtraction will be 1 inch from the front hanger to the center hanger and another 1 inch from the center hanger to the…

I would not recommend reusing your existing u-bolts because the nuts are designed to mis-align the threads as they are tightened down to prevent the u-bolts from coming loose. You should choose the u-bolt kit that will fit the diameter of your axle.…

You want to make sure the hangers on your trailer have the same width as your leaf spring so if your leaf spring is 1-3/4" wide then you don't want to use a 2" or 2-1/2" wide hanger. It's true that you want the hanger bolts…

There are pre-greased hubs available in a 5 on 4-1/2 bolt pattern. In order to find the correct replacement hub you can take apart your good hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part…

The Hopkins Plug-In Simple Vehicle Wiring Harness #HM43534 is designed to fit a 2016 Nissan Frontier which came from the factory with a 7-way connector on the vehicle. If your Frontier did not come from the factory with a 7-way you will need the…

Most class V hitches will use a 2-1/2 inch receiver opening (although there are a few exceptions that use a 2 inch receiver) and will have towing capacities up near or to 20,000 lbs towing/2000 lbs tongue weight capacity. A Class IV will have a 2…

When it comes to lowering your trailer 2-2.5 inches if your have leaf springs and they're positioned above the axle tube, you can flip them with the Dexter Trailer Springs Over-Under Conversion Kit #K71-385-00 if you have a 3 inch diameter axle…

The bronze bushings and wet bolts are a great option but they still do require maintenance especially under the conditions you referenced. There really isn't any new information in comparing it is basically the difference between maintenance…

To determine the axle size you will need there are some measurements needed. First, if you are replacing the axle then you can measure the one you have. Measure from the center of one spring seat to the center of the other spring seat. Then measure…

Yes, the diameter is indeed 2-3/8 inches for the 3,500 lb axle you asked about, which is the following part number: - Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs #e65GR So they will work with U-bolts that fit…

Yes, the Steel Mini Mod Trailer Wheel part #AM20364 is compatible with 215/75-14 tires. It has a galvanized finish so it's best used on boat trailers in both fresh and salt water.