Dexter Axle Trailer Axles - Leaf Spring Suspension - 35545I-EZ-89 Review Video

Anytime that a spindle is starting to take damage you will want to replace it as that will affect the performance of your bearings and seal. In this case since that chipping is right where the seal sits (as you mentioned) that will eat at the…

The issue that you are going to run into is that trailer tires are not rated for 70 miles per hour or more. The tires we carry are rated for a maximum of 65 miles per hour. The hubs would be limited to that. Some agricultural hubs are only rated for…

You could potentially replace your leaf springs with a larger capacity spring but will need to match the length of your current leaf springs to avoid having to remove and reinstall the hangers and rest of the suspension system, which is a giant…

We don't carry that particular item, but it sounds like you have a 3500 lb axle. We carry some common sized trailer axles, but to determine if any of them would work for you I'll need the following information: -Axle hub face to hub face…

I would not recommend reusing your existing u-bolts because the nuts are designed to mis-align the threads as they are tightened down to prevent the u-bolts from coming loose. You should choose the u-bolt kit that will fit the diameter of your axle.…

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

Trailer suspension U-bolt plates can bend, yes, so it doesn't sound like you have anything to worry about. For 3/8 inch nuts on the U-bolts in kit #APUBR-10 they should be torqued between 30 and 50 foot pounds according to Dexter Axle.

That is an excellent question! In some instances mixing regular grease like part #L11390 won't hurt when mixed with marine grease, but in some situations it can ruin your hubs/spindles and taking the extra time to clean off the grease and redo…

A Timbren Rear Suspension Enhancement System such as #TFR1504D which fits your 2013 Ford F-150, does not take the place of a weight distribution system. The Timbren systems will help reduce body roll and absorb shock but will not transfer the load of…

The Dexter Axle 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles, #DX73QR is 26-5/8" long overall and to the center of bolt is 11-1/2".

It sounds like you have a pretty nice trip planned! Bias trailer tires do not have a set range you can travel as they meet DOT standards for a tire. With that said before you start your trip I would make sure to check your tires for any dry rot or…

If your Double-Eye Leaf Springs are 27 inches long, you will just want to mount the hangers in the Redline Single-Axle Trailer Hanger Kit #APS4 mentioned in your question about 26-1/2 inches apart. As a general rule, you want the distance between…