Yakima Bike Locks - Cable Lock - Y07238 Review Video

The Yakima LockUp Hitch Lock and Cable Lock Item #Y07238 appear to be the same as its counterpart on the Yakima site SKU: #8007238. In regards to a red piece at the end of the lock the Yakima DeadLock Hitch Lock and Integrated Locking Cable has…

Once the rack is locked into the receiver, the end of the cable with the loop is passed around the shank of the rack near the receiver. Then the end of the cable with the locking tip is passed through the loop, and the cable is pulled snug. The…

There is not any additional vertical adjustment for the Yakima EXO Swing Away Storage #Y44ZR however you might be able to cheat out a quarter inch. The lock cores should already be installed on this system so it's not going to include the control…

The linked page displays all Yakima replacement hitch bolts for their various bike racks. You may be able to identify the correct one for your rack by its appearance, but if not we do include the names of the compatible carriers for each one. If you…

When it comes to The Swagman Cable Lock #S64030 it will not work properly with your Yakima Double Down because it has a different thread pattern on the lock. You would have to use The Yakima LockUp Hitch Lock and Cable Lock - Same Key System #Y07238.…

Yakima Mounting bolt #Y8890176 is a 1/2 inch bolt, which measures 4-9/16 inches long. This bolt works with the following bike carriers: Yakima FlipSide (Y02426), DoubleDown 2 (Y02423), DoubleDown 4 (Y02424), DoubleDown 5 (Y02425) BigHorn 4 (Y02405),…

We can get you set up with everything you need for your 2020 Ford Ranger so you can use the Yakima LockNLoad Platform Rack for Crossbars #Y05044-39. I checked with Yakima for you, and this the 55" long x 49" wide LockNLoad, which is the…

You can add the locking function to your Yakima Double-Down hitch bike rack by just adding the lock portion #Y07235 to your existing threaded hitch pin. If you need a replacement hitch pin use part #Y8890176.

We offer Yakima's HitchLock for Yakima Hitch Mounted Bike Racks, which you can use on your DoubleDown carrier. You can use part #Y07235. This lock attaches over the existing hitch pin and is secured with an included SKS core and key. Please refer…

Since the lock number of your hitch lock is only listed on the side of the lock core, and yours is locked and therefore not accessible, the only solution is to replace what you have with a new hitch bolt and lock. For that you'd need part…

The rectangular bolt head of RR72XB is 1 13/16" long x 7/8" tall x 1/8" thick. The type of track nuts that would fit into the #RTS507 would be the part #RRQMFK11 though. The #RR72XB is for fitting into the top channel of the…

The Yakima FourTimer bike rack you have does not include locks, so I recommend using the Yakima LockUp Hitch Lock and Cable Lock - Same Key System (SKS) #Y07238. This will secure your bikes and your rack to your trailer hitch and deter theft. For a…