Customers compare TRSS300 to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hey Doug, the #8-213-5UC1 hub that you mentioned uses only the #25580 inner and #LM67048 outer bearings. The #25580 bearing has a 1.75" ID and roughly 3-1/4" OD. The #L68149 bearing has a 1.378" ID and roughly…
view full answer...If you have a round 3" diameter axle on your Spartan boat trailer then you are going to want to use the CE Smith U-Bolt Kit part #CE23003 which contains u-bolts that are 7" long x 3-1/8" wide x 3/8" diameter. The…
view full answer...Sure is! The only difference between the 5,200lb axle #e55GR and 6,000lb axle #e23gr is the wall thickness of the tubing. They both use the same spindle as it's actually the outer bearing and race in the hub that give extra strength and not…
view full answer...What you're looking for is an 86-1/2" long replacement axle. Since you will need new hubs and drums, along with brakes, I recommend getting the #8327816-EB. This has a 71-1/2" spring center length so you will also need to…
view full answer...I got in contact with Lippert, and based off the information they gave me the Dexter Trailer Axle Beam with E-Z Lube Spindles #8327816 is the correct axle replacement.
view full answer...A leaf spring seat, or perch as it sometimes called, is the mount that is welded to the axle where the trailer's leaf springs sit on top of or below the axle. An example of one is part #TRSS300. I've attached a picture that points out the…
view full answer...The CE Smith U-Bolt Kit #CE23003 will fit your 3" round Dexter 4400lb axle. The U-bolts are 7" long. The 6-Leaf Double-Eye Spring #e27SR uses 6 leaves that are 3/8" thick which will make the spring pack 2-1/4" tall. When you add…
view full answer...The Lippert 5,200 lb axle you have has a hub face to hub face of 86.5 inches which is identical to the Dexter #8327816 you referenced, however the 68.5 inch spring seats of your Lippert axle are not identical to the 71.5 inch spring centers of the…
view full answer...For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…
view full answer...You'll be perfectly fine going with a 74 inch spring center to spring center axle with 74-1/2 inch spring center. That said we don't have 64 inch hub face to hub face axles with 74 inch spring centers, only 89 inch hub face to hub face and 74…
view full answer...The equalizers in the E-Z Flex system #K71-653-00 are designed to fit in place of equalizers that measure 7-1/4 inches to 8-1/4 inches so they will still fit but might not provide as good of a ride as they possibly could if the axle spacing is in the…
view full answer...I do not have the exact axle measurements for your Keystone Bullet travel trailer, but the E-Z Flex Heavy Duty Rubber Suspension System #K71-653-00 is designed to fit trailers with 35 inches of axle spacing from the center of one axle to the center…
view full answer...